Skip to product information
1 of 6

Valve Cover Gasket Set for Land Rover Range Rover Sport (2010-2016) 5.0L



Regular price $50.95
Sale price $50.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Valve Cover Gasket Set for 2010-2016 Land Rover Range Rover Sport (L320/L494)

What it Does: This valve cover gasket set seals the cylinder head mating surfaces on the 2010-2016 Land Rover Range Rover Sport (L320/L494) equipped with the AJ133 5.0L V8 to stop pressurized oil leaks.

The Stock Land Rover Range Rover Sport Gasket Failure

Factory rubber seals on the L320 and L494 platforms endure extreme under-hood heat soak from the AJ133 5.0L V8, especially on supercharged trims. Over repeated thermal cycles, OEM elastomers lose plasticity, harden, and crack along the cam carrier perimeter and spark plug tube bosses. This degradation allows oil seepage onto hot exhaust manifolds and into ignition wells, triggering lean faults like P0171/P0174 or misfire codes like P0300.

Common Symptoms of a Failing OEM Valve Cover Gasket

  • Oil-Fouled Misfires (P0300): Hardened inner seals leak oil into spark plug wells, shorting coil boots.
  • Burning Oil Odor: External seepage drips onto hot exhaust manifolds along both cylinder banks.
  • Crankcase Vacuum Leaks (P0171): Compromised sealing surfaces disrupt PCV pressure and lower oil levels.

The Direct-Fit Rubber Gasket Solution

Engineered as a direct-fit replacement for LR010789, LR010882, LR011220, LR014345, ROV0087, and ROV0087G, this 10-piece kit restores factory sealing geometry across both banks. Molded from heat-resistant rubber, the two perimeter gaskets and eight smaller seals resist thermal compression set and oil degradation. Replacing every upper seal simultaneously eliminates recurring cam-cover and spark-plug-well weepage without modifying factory hardware.

What's Included

  • 2 Valve Cover Gaskets (Left and Right Banks)
  • 8 Smaller Rubber Gaskets

Technical Specifications

Fitment 2010-2016 Land Rover Range Rover Sport
Engine / Chassis AJ133 5.0L V8 / L320 (2010-2013), L494 (2014-2016)
Stock Engine Output 375-510 hp / 375-461 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # LR010789, LR010882, LR011220, LR014345, ROV0087, ROV0087G

Compatibility

  • 2010-2013 Land Rover Range Rover Sport — 5.0L Gas Naturally Aspirated
  • 2010-2016 Land Rover Range Rover Sport — 5.0L Gas Supercharged

Frequently Asked Questions & Fitment Warnings

Does this fit the L320 and L494 Range Rover Sport?

Yes. This is a direct fit for the 2010-2016 Land Rover Range Rover Sport equipped with the AJ133 5.0L V8 engine. This set is not listed for 3.0L engines.

Are both banks included, and does this kit include a valve cover?

Gaskets only. Both left and right valve cover gaskets plus eight smaller rubber gaskets are included; complete valve covers, PCV membranes, and spark plugs are not included.

What prep is required when installing LR010789/LR010882 replacement seals?

Clean mating surfaces and torque to spec. Remove both covers, clean the sealing surfaces, seat the LR010789/LR010882 gaskets in factory order, and torque fasteners in sequence.

The Land Rover Precision Standard

Proper crankcase sealing on the L320 and L494 preserves ECU fuel-trim accuracy and prevents coil-pack oil fouling. Replace both banks together for leak-free, CEL-free operation.




Fitment

Make

Land Rover

Engine Size

  • 5.0L

Year

  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Valve Cover Gasket Set for Land Rover Range Rover Sport (2010-2016) 5.0L

$50.95