Turbo Kit for Hyundai Tiburon (1996-2001) 2.0L

Complete intercooled T3/T4 turbo package for the 1996–2001 Hyundai Tiburon with the 2.0L DOHC four. It pairs a TIG-welded 321 stainless tubular T3 manifold with a hybrid T3/T4 turbo, 35mm external wastegate with positioning adapter and dump tube, stainless downpipe, front-mount intercooler, boost controller, blow-off valve, turbo timer and fuel-system parts in one box. Most installs keep A/C and power steering, and it works with manual or automatic transmissions. Expect about 50–100 hp over stock at a conservative 8 psi with a proper tune. The 485+ hp figure is the hardware's ceiling at 25+ psi with a built engine, fueling and supporting mods, not a dyno result for a stock car. Engine family reference: G4GF.

Why this kit

• TIG-welded 321 stainless tubular manifold with large primaries and a thick T3 flange
• T3/T4 hybrid turbo with a .57 trim compressor and .50 / .63 A/R housings
• 35mm external wastegate with positioning adapter, dump tube and stainless downpipe
• Front-mount intercooler, full 2.5" piping, two slim fans and an electronic turbo timer
• Battery relocation box, heat wrap, intake filter and radiator hose sleeving included

Package Includes

• (1) T3/T4 hybrid turbocharger with oil fitting gaskets and mounting studs
• (1) Stainless tubular turbo manifold, T3 flange, polished, with gaskets and hardware
• (1) Front-mount aluminum intercooler, 2.5" inlet / outlet, under 2% pressure drop
• (1) Aluminum intercooler piping kit: (2) 2.5" straight pipes, (2) 90°, (2) 60°, (2) 45° bends, (2) 2.5" 90° silicone couplers, (6) 2.5" straight silicone couplers, (16) stainless worm-gear clamps
• (1) Turbo oil line kit: 77" feed line, 36" angled feed, 18" 5/8" high-temp 550 psi return, T fitting, fittings, gaskets and hardware
• (1) Aluminum battery relocation kit with cables, straps and hardware
• (1) 35mm external wastegate, 2-bolt flange, with gaskets and flanges
• (1) Wastegate positioning adapter and (1) wastegate dump tube, stainless
• (1) Stainless downpipe, 2.5" inlet, 5-bolt flange
• (1) Adjustable boost controller with install kit
• (1) Blow-off valve with install kit
• (2) Slim reversible cooling fans
• (1) Electronic turbo timer with LED display and wiring
• (1) Adjustable fuel pressure regulator with gauge
• (1) Billet aluminum high-flow fuel filter, -6AN fittings
• (1) Oil catch can and (1) high-flow breather cap
• (1) 3" high-flow intake filter
• (1) 10 m exhaust heat wrap
• (1) Radiator hose sleeving kit
• (1) Coolant sensor bung, 38mm

Turbocharger Specs

• Type: T3/T4 hybrid, wet-float bearings, balanced
• Compressor: .57 trim wheel, .50 A/R housing, 3" inlet, 2" outlet
• Turbine: .63 A/R housing, T3 inlet flange
• Oil inlet: 1/8" NPT

Exact Fitment — Hyundai Tiburon

• 1996–2001 Tiburon with the 2.0L DOHC four
• Not for the US-market 1.8L Tiburon years (see the separate 1.8L Elantra / Tiburon kit)
• Not for 2003+ Tiburon / Tuscani or later Gamma / Theta engines
• Intercooler piping is universal and needs cutting and fitting per chassis

Not Included

• Exhaust beyond the downpipe
• Larger injectors, fuel pump and ECU tune (required)
• Clutch upgrade, boost gauge and wideband
• Oil-pan return bung if your setup needs one

Installation Notes

• Professional installation strongly recommended. Expect cutting and fitting of the universal piping and test-fitting the downpipe
• Oil return must drain by gravity; prime the turbo with oil before first start and check for leaks
• Blow-off valve flanges are installed at your discretion
• Keep boost at about 8 psi until fuel and tune are upgraded, and let the turbo timer handle cool-down

FAQs

Does this fit a 1.8L Tiburon or Elantra? No. Use the separate 1.8L kit for those engines.

How much power will it make? About 50–100 hp over stock at 8 psi on a healthy stock engine with a proper tune. 485+ hp is the hardware ceiling with a built engine and full supporting mods.

Can I keep A/C and power steering? Most installs keep both; confirm clearance during mock-up.

Manual or automatic? Fits either when the engine matches.

Is it plug-and-play? No. You still need injectors, a fuel pump, an ECU tune and some pipe fitting.