Stainless Dual Exhaust Tips for BMW 540i M5 E39 (1997-2003)

Polished T-304 Dual Exhaust Tips for 1997-2003 BMW 5 Series, M5 (E39)

What it Does: The Stainless Dual Exhaust Tips replace corroded or undersized factory outlets on the 1997-2003 BMW 5 Series, M5 to provide corrosion-resistant exhaust termination and an aggressive staggered quad-exit profile.

The Stock BMW 5 Series, M5 Aesthetic and Corrosion Weakness

Factory exhaust terminations on the E39 platform—whether the downturned hidden outlets found on the M62B44-powered 540i or aged standard tips on the S62B50 M5—suffer from chronic carbon buildup, road-salt pitting, and thermal discoloration. The original thin-gauge single-wall metal easily oxidizes under relentless heat cycles, and the stock diameters fail to properly fill out the rear bumper valance cutouts, leaving an unfinished rear aesthetic.

The Engineering Solution

Constructed from mirror-polished T-304 stainless steel, these heavy-duty dual-outlet tips deliver long-term resistance to acid etching, thermal oxidation, and rust. Featuring dual 3.5-inch double-wall outlets paired to a 3.0-inch slip-fit inlet, the assembly utilizes staggered, angle-cut tips specifically contoured to align flush with the curvature of the E39 rear apron. Each outlet transition is reinforced with continuous high-precision TIG welds to preserve structural rigidity under high exhaust gas velocity. The units can be clamped via heavy-duty exhaust sleeve clamps or bead-welded directly to the muffler tailpipes for a permanent, vibration-proof installation.

What's Included

• 1 Left side dual exhaust tip
• 1 Right side dual exhaust tip

Technical Specifications

Compatibility

• 1997-2003 BMW 540i (E39) 4.4L V8
• 2000-2003 BMW M5 (E39) 4.9L V8
• Requires 3.0-inch outer diameter tailpipes (confirm pipe diameter prior to ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the E39 5 Series, M5?

Yes, this is a direct slip-fit for 1997-2003 BMW 5 Series, M5 models equipped with 3.0-inch outer diameter tailpipes. Vehicles equipped with factory non-3.0-inch tailpipes or uncut rear valances will require pipe reducers and valance trimming.

Do these exhaust tips require welding for installation?

No, they are engineered to slip directly over 3.0-inch tailpipes and can be securely clamped on, though bead TIG welding is recommended for a permanent installation.

The BMW Precision Caliber

Engineered to complement high-performance European platforms, these tips deliver precise exhaust contouring, zero backpressure interference, and completely bypass downstream exhaust sensors to ensure zero check engine lights.