Short Ram Air Intake System for Mitsubishi Outlander 2.0L (2014–2020)

This short ram air intake system is designed to replace the factory air box on 2014–2020 Mitsubishi Outlander models equipped with the 2.0L non-turbocharged engine. The system reduces intake restriction by shortening the air path and using larger diameter piping, allowing the engine to draw air more efficiently. This results in improved throttle response, increased airflow, and a more audible induction sound.

The intake uses a high-flow air filter positioned closer to the engine compared to the factory setup. This design prioritizes maximum airflow while maintaining adequate filtration for engine protection. The aluminum or composite piping provides a smoother internal surface than the factory intake tube, reducing turbulence in the intake path.

Vehicle Fitment

• 2014–2020 Mitsubishi Outlander ES (2.0L Non-Turbo)
• 2014–2020 Mitsubishi Outlander LE (2.0L Non-Turbo)
• 2014–2020 Mitsubishi Outlander SE (2.0L Non-Turbo)
• 2014–2020 Mitsubishi Outlander SEL (2.0L Non-Turbo)
• Not compatible with turbocharged engines

Performance & Design

The short ram design positions the air filter in the engine bay, creating a shorter and more direct path for incoming air. This configuration can improve airflow velocity and reduce intake restriction compared to the factory system. Performance gains will vary based on vehicle condition, driving conditions, and altitude. The open-element filter design produces a more pronounced intake sound during acceleration.

The intake tube features smooth bends and consistent internal diameter to minimize airflow disruption. Connection points use secure clamps and couplers to prevent air leaks and maintain proper seal under engine vibration. The filter element is washable and reusable, eliminating the need for periodic filter replacement.

Features & Components

• Short ram intake tube with optimized routing
• High-flow washable air filter
• Heat-resistant couplers for connection points
• Stainless steel or aluminum clamps
• Direct replacement for factory air box
• Reusable filter can be cleaned and re-oiled as needed

What's Included

• Short ram intake pipe
• High-flow washable air filter
• Couplers and clamps
• Mounting hardware
• Installation instructions

Installation

• Direct replacement for factory air intake assembly
• Uses existing mounting points
• No cutting or drilling required
• Installation time approximately 45–60 minutes
• Basic hand tools required (screwdrivers, socket wrenches)

Installation Note:
After installation, disconnect the negative battery terminal for 10–15 seconds to allow the engine control unit to reset and adapt to the modified airflow characteristics. Always disconnect the battery before performing any engine bay work for safety.

Filter Maintenance

The washable air filter can be cleaned periodically using appropriate filter cleaning solution and filter oil. Remove the filter, apply cleaning solution, rinse thoroughly, allow to dry completely, re-oil according to manufacturer specifications, and reinstall. This process can be performed as needed based on driving conditions and environment, typically every 30,000–50,000 miles under normal use.

This short ram air intake system provides improved airflow characteristics for the 2.0L non-turbocharged Outlander engine while maintaining a direct-fit installation. The system is designed to work with the factory engine management system without requiring additional modifications or tuning.