Radiator for Mini Cooper Paceman (2013-2016) 1.6L

All-Aluminum 2-Row Radiator for 2013-2016 Mini Cooper Paceman (R61)

What it Does: The all-aluminum 2-row performance radiator replaces the failure-prone factory heat exchanger on the 2013-2016 Paceman to maximize coolant heat dissipation and prevent high-temperature seam separation.

The Stock Mini Cooper Paceman Cooling Weakness

Factory radiators in the R61 chassis rely on PA66 plastic end tanks mechanically crimped to an aluminum core with elastomeric gaskets. Under the elevated operational temperatures and cooling system pressures generated by the 1.6L engine, constant heat-cycling degrades the structural polymers. Over time, the composite tanks embrittle, leading to hairline cracking along the inlet neck, failed core seams, and rapid loss of coolant pressure.

The Engineering Solution

This heavy-duty replacement upgrades the assembly to an all-aluminum construction featuring a dual-row brazed tube-and-fin core and structural aluminum end tanks. Hand TIG-welded to eradicate mechanical crimp joints, this core improves fluid volume and increases surface area contact for improved convective cooling. The welded tank-to-core interface withstands elevated thermal loads, eliminating heat soak and preventing catastrophic pressurized blowouts under hard driving conditions.

What's Included

• 1 x Direct-fit 2-row all-aluminum radiator
• Protective transport caps for inlet/outlet ports

Technical Specifications

Compatibility

• 2013-2016 Mini Cooper Paceman 1.6L

Frequently Asked Questions & Fitment Warnings

Does this fit the R61 Paceman?

Yes, this is a direct fit for the 2013-2016 Mini Cooper Paceman equipped with the 1.6L Prince engine. Verify transmission cooler configuration, fan shroud tabs, and lower hose geometry prior to install; this unit is not intended for non-listed applications.

Do I need to bleed the cooling circuit after installation?

Yes, the cooling circuit must be thoroughly flushed and vacuum-bled using OEM-spec coolant to clear air pockets from the cylinder head passages.

The Mini Cooper Precision Standard

Engineered to exact European tolerances, this all-aluminum component retains critical factory clearances to prevent sensor faults and thermal runaway, maintaining factory engine calibration and long-term operating stability.