Radiator for Dodge Avenger (2008-2014) 2.0L 2.4L 2.7L 3.5L 3.6L

Heavy-Duty 3-Row All-Aluminum Performance Radiator for 2008-2014 Dodge Avenger (JS Platform)

What it Does: The 3-row all-aluminum radiator replaces the failure-prone factory cooling unit on the 2008-2014 Dodge Avenger to maximize thermal dissipation capacity and prevent catastrophic coolant loss.

The Stock Dodge Avenger Cooling System Weakness

The factory radiator on the JS chassis Dodge Avenger utilizes a thin single-row core mated to molded composite plastic end tanks sealed with rubber crimp gaskets. Over repeated thermal expansion cycles, high operating temperatures and underhood pressure embrittle the PA66 plastic, causing micro-fracturing at the inlet and outlet tank necks. Furthermore, thermal cycling causes the crimped aluminum tabs to fatigue and separate from the core header plates, inducing coolant leaks, core warping, and eventual head gasket failure under sustained driving loads.

The Engineering Solution

Engineered as a rugged upgrade over OEM heat exchangers, this unit features a high-density 3-row furnace-brazed aluminum tube-and-fin core paired with 100% TIG-welded aluminum end tanks. By eliminating failure-prone plastic tanks and mechanical crimp joints, this all-aluminum construction withstands elevated cooling system pressures and resistance to torsional stress. The multi-row fin array significantly broadens surface area contact, accelerating thermal heat transfer across high-heat operations on both four-cylinder World Gas and high-displacement Pentastar V6 applications.

What's Included

• 1 x All-aluminum 3-row radiator assembly
• Protective port caps (pre-installed on inlet/outlet connections)

Technical Specifications

Compatibility

• 2008-2014 Dodge Avenger 2.0L Inline-4
• 2008-2014 Dodge Avenger 2.4L Inline-4
• 2008-2010 Dodge Avenger 2.7L V6
• 2008-2010 Dodge Avenger 3.5L V6
• 2011-2014 Dodge Avenger 3.6L V6

Frequently Asked Questions & Fitment Warnings

Does this fit the JS Platform Avenger?

Yes, this is a direct bolt-in fit for the 2008-2014 Dodge Avenger equipped with 2.0L, 2.4L, 2.7L, 3.5L, and 3.6L engines. This product is application-specific and does not fit universal chassis or alternative platforms without factory hose and mount configurations.

Do I need to bleed the cooling system after installation?

Yes, a complete coolant system flush and vacuum bleed are required to purge all trapped air pockets from the engine block and heater core to prevent localized overheating.

The Dodge Caliber & Durability Standard

Built to handle continuous heat dissipation under aggressive driving conditions, this all-aluminum radiator withstands elevated coolant pressures and extreme thermal cycles without structural failure.