Performance Water Pump Timing Belt Kit for Saturn Vue (2004-2007) 3.5L
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
Direct-Fit Timing Belt & Water Pump Kit for 2004-2007 Saturn Vue (Theta)
What it Does: This 9-piece timing belt and water pump service kit synchronizes camshaft-to-crankshaft rotation and restores coolant circulation on the 2004-2007 Saturn Vue Theta equipped with the interference L66 (J35S1) 3.5L V6 engine.
The Stock Saturn Vue Timing & Cooling Failure
On the Theta chassis equipped with the interference L66 (J35S1) 3.5L V6, the timing belt drives both camshafts and the mechanical water pump in strict synchronization. Under sustained thermal cycling and high mileage, the hydraulic tensioner loses internal fluid pressure while roller bearings lose grease and bind. Simultaneously, rubber belt compounds harden and crack, and the mechanical water pump seal weeps coolant. Left unaddressed, belt slip or failure causes immediate piston-to-valve contact and catastrophic valvetrain damage.
Common Symptoms of a Failing OEM Timing Belt & Water Pump
- Check Engine Light / Cam-Crank Correlation DTCs: Belt stretch or tensioner slack triggers P0340, P0341, or P0335 timing correlation and sensor faults.
- Front-Engine Noise & Coolant Leaks: Dry idler or tensioner bearings produce cold-start chirping or whining, while a worn mechanical water pump weeps coolant from the weep hole.
- Overheating & Catastrophic Engine Risk: Impeller wear or coolant loss leads to P0217 over-temperature conditions, while belt rupture causes severe internal interference damage.
The Direct-Fit 9-Piece Timing Service Solution
This 9-piece direct-fit service kit replaces every front-engine wear item in one teardown using components engineered to match factory tolerances for 14400-RCA-A01 and 19200-RDV-J01. High-tensile fiberglass-reinforced timing belt construction resists elongation under high-RPM loads, paired with sealed-bearing idler and tensioner rollers and a calibrated hydraulic tensioner. The mechanical water pump includes a pre-formed gasket, flanked by precision-molded front camshaft and crankshaft oil seals plus a fresh serpentine drive belt for zero-modification bolt-on installation.
What's Included
- 1 Timing Belt
- 1 Idler Roller / Pulley
- 1 Tensioner Roller / Pulley
- 1 Mechanical Water Pump and Pre-Formed Gasket
- 1 Hydraulic Tensioner
- 2 Front Camshaft Seals
- 1 Front Crankshaft Seal
- 1 Serpentine Drive Belt
Technical Specifications
| Fitment | 2004-2007 Saturn Vue |
|---|---|
| Engine / Chassis | L66 (J35S1) 3.5L V6 / Theta |
| Stock Engine Output | 250 hp / 242 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 14400-RCA-A01, 14550-RCA-A01, 14510-RCA-A01, 19200-RDV-J01, 14520-RCA-A01, 91213-R70-A01, 91213-R70-A02, 91212-R70-A01, 91212-R70-A02, 38920-RCA-A01, 38920-RCA-A03, 56992-RV0-A05 |
Compatibility
- 2004-2007 Saturn Vue — 3.5L Gas Naturally Aspirated V6 (Manual or Automatic Transmission)
Frequently Asked Questions & Fitment Warnings
Does this fit the Theta Vue?
Yes. This is a direct fit for the 2004-2007 Saturn Vue equipped with the L66 (J35S1) 3.5L V6 engine, regardless of manual or automatic transmission. This kit is for the 3.5L V6 engine only and will not fit 2.2L or 2.4L 4-cylinder models.
Does this kit include both the water pump and timing belt, and will it require coolant?
Yes. The package supplies the timing belt (14400-RCA-A01), mechanical water pump with gasket (19200-RDV-J01), pulleys, hydraulic tensioner, front cam/crank seals, and serpentine belt. Because replacing the water pump requires draining the cooling system, you must refill and bleed the coolant after installation; coolant and spark plugs are not included.
Are gaskets and seals included for installation?
Yes. A pre-formed water pump gasket, two front camshaft seals, and one front crankshaft seal are included in the box. This is a comprehensive front-engine service requiring engine support, crank pulley removal, exact timing mark alignment, factory fastener torque specs, and cooling system bleeding.
The Saturn Precision Standard
Engineered to meet OEM dimensional and tensile specifications, this complete 9-piece kit eliminates repeat front-cover labor on your interference V6. Replacing the belt, tensioners, seals, and water pump together ensures reliable cam-to-crank timing and stable thermal control for daily driving and long-haul dependability.
Fitment
Fitment
|
Make |
Saturn |
|---|---|
|
Engine Size |
|
|
Year |
|
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$180.95