Performance Water Pump & Timing Belt Kit for Honda Ridgeline (2006-2014) 3.5L

Heavy-Duty Timing Belt & Water Pump Service Kit for 2006-2014 Honda Ridgeline (YK1)

What it Does: The Performance Water Pump & Timing Belt Kit synchronizes the camshaft and crankshaft rotation while restoring cooling efficiency on the 2006-2014 Ridgeline to eliminate catastrophic interference engine failure and maintain optimal operating temperatures.

The Stock Honda Ridgeline Timing System Deterioration

The factory interference J35A9 and J35Z5 V6 engines rely entirely on a rubber timing belt and a hydraulic damper to maintain critical valve-to-piston clearance. Over extended service intervals, thermal cycling and engine bay ozone degrade the OEM hydrogenated nitrile butadiene rubber (HNBR) belt, causing tooth shear, micro-cracking, and elongation. Simultaneously, factory hydraulic tensioners suffer internal fluid bypass and dampening loss, leading to belt slack and skipped teeth. Additionally, the stock water pump bearing and mechanical shaft seal succumb to continuous high-RPM impeller shaft load, resulting in weeping coolant, bearing seizure, and unmitigated catastrophic valvetrain collision.

The Engineering Solution

This comprehensive service package restores primary mechanical synchronization using high-tensile synthetic elastomeric compounds that resist heat soak, oil contamination, and tooth shear. The heavy-duty water pump features a cast-aluminum housing and a precision-balanced impeller to ensure optimal coolant cavitation resistance and high-flow thermal dissipation. Matched with an OE-spec hydraulic tensioner, premium sealed idler bearings, and fluoropolymer camshaft and crankshaft front oil seals, this kit maintains rigid dynamic belt tension across the entire RPM range to protect cylinder heads and valvetrain architecture during sustained towing loads.

What's Included

• 1 Timing Belt (OE 14400-RCA-A01)
• 1 Idler Roller Pulley (OE 14550-RCA-A01)
• 1 Tensioner Pulley (OE 14510-RCA-A01)
• 1 Water Pump with Pre-Formed Gasket (OE 19200-RDV-J01)
• 1 Hydraulic Timing Belt Tensioner (OE 14520-RCA-A01)
• 2 Front Camshaft Oil Seals (OE 91213-R70-A02 / 91213-RKG-003)
• 1 Front Crankshaft Oil Seal (OE 91212-R70-A02 / 91212-5MR-A01)
• 1 Serpentine Accessory Drive Belt (OE 38920-RCA-A03 / 56992-R70-A01 / 56992-RV0-A05)

Technical Specifications

Compatibility

• 2006 Honda Ridgeline 3.5L V6 (RT, RTS, RTL)
• 2007 Honda Ridgeline 3.5L V6 (RT, RTS, RTL, RTX)
• 2008 Honda Ridgeline 3.5L V6 (RT, RTS, RTL, RTX)
• 2009 Honda Ridgeline 3.5L V6 (RT, RTS, RTL)
• 2010 Honda Ridgeline 3.5L V6 (RT, RTS, RTL)
• 2011 Honda Ridgeline 3.5L V6 (RT, RTS, RTL)
• 2012 Honda Ridgeline 3.5L V6 (RT, RTS, RTL, Sport)
• 2013 Honda Ridgeline 3.5L V6 (RT, RTS, RTL, Sport)
• 2014 Honda Ridgeline 3.5L V6 (RT, RTS, RTL, Sport, SE)

Frequently Asked Questions & Fitment Warnings

Does this fit the YK1 Ridgeline?

Yes, this is a direct fit for the 2006-2014 Honda Ridgeline equipped with the J-Series 3.5L V6 engine. This kit does not fit 4-cylinder Honda platforms, non-J-series conversions, or second-generation (2017+) 3.5L direct-injected engines.

Do I need to bleed the cooling system after installing this kit?

Yes, replacing the water pump requires draining the coolant; a full vacuum fill or manual burping procedure is required to purge air pockets and prevent hot spots in the aluminum cylinder heads.

The Honda Workhorse Standard

Engineered to handle severe duty cycles, continuous payload hauling, and mountain towing, this complete timing and cooling assembly restores the precision engineering and valvetrain durability required to keep your YK1 truck on the road for another 100,000 miles.