Performance Water Pump Timing Belt Kit for Acura TSX (2010-2014) 3.5L
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
Complete Water Pump & Timing Belt Service Kit for 2010-2014 Acura TSX (CU4)
What it Does: This 9-piece timing belt and water pump service kit for the 2010-2014 Acura TSX (CU4) J35Z6 3.5L V6 synchronizes camshaft-to-crankshaft rotation while restoring closed-loop coolant circulation.
The Stock Acura TSX Timing & Cooling Failure
On the interference J35Z6 3.5L V6 inside the CU4 chassis, the factory timing system relies on a hydraulic tensioner and mechanical water pump that degrade under sustained thermal cycling. Over time, hydraulic tensioner seal weep reduces belt preload, allowing tooth skip or tensioner chatter on cold startup. Simultaneously, worn water pump impeller bearings and aging front cam and crank seals leak coolant and engine oil onto the belt ribs, accelerating elastomer cracking and triggering P0016 or P0340 correlation faults.
Common Symptoms of a Failing OEM Timing Belt & Water Pump
- Check Engine Light / Timing Faults: Stretched belts or failing hydraulic tensioners trigger P0016, P0340, or random misfire P0300 codes due to camshaft-crankshaft phase drift.
- Front-Engine Noise & Fluid Leaks: Worn idler bearings, hydraulic tensioner bleed-down, or failing water pump seals produce front cover rattling and visible coolant weeping.
- Overheating & Interference Damage: Impeller cavitation drives coolant temperatures upward (P0217), while timing belt failure on this interference V6 causes immediate piston-to-valve contact.
The Direct-Fit 9-Piece Timing & Water Pump Solution
This complete 9-piece direct-fit service kit replaces every primary wear component behind the front timing cover in one job, matching factory 14400-RCA-A01 and 19200-RDV-J01 specifications. High-tensile belt construction resists oil contamination and heat soak, while precision-sealed idler and tensioner rollers maintain consistent belt tracking across the J35Z6 rev range. The included mechanical water pump with pre-formed gasket, hydraulic tensioner (14520-RCA-A01), front camshaft and crankshaft seals, and serpentine drive belt bolt directly to OEM mounting locations.
What's Included
- 1 Timing Belt
- 1 Idler Roller / Pulley
- 1 Tensioner Roller / Pulley
- 1 Mechanical Water Pump and Pre-Formed Gasket
- 1 Hydraulic Tensioner
- 2 Front Camshaft Seals
- 1 Front Crankshaft Seal
- 1 Serpentine Drive Belt
Technical Specifications
| Fitment | 2010-2014 Acura TSX |
|---|---|
| Engine / Chassis | J35Z6 3.5L V6 / CU4 |
| Stock Engine Output | 280 hp / 254 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 14400-RCA-A01, 14550-RCA-A01, 14510-RCA-A01, 19200-RDV-J01, 14520-RCA-A01, 91213-R70-A01, 91213-R70-A02, 91212-R70-A01, 91212-R70-A02, 38920-RCA-A01, 38920-RCA-A03, 56992-RV0-A05 |
Compatibility
- 2010-2014 Acura TSX — 3.5L V6 Gas Naturally Aspirated (Automatic & Manual Transmissions; Excludes 2.4L 4-Cylinder)
Frequently Asked Questions & Fitment Warnings
Does this fit the CU4 TSX?
Yes. This is a direct fit for the 2010-2014 Acura TSX equipped with the J35Z6 3.5L V6 engine across both automatic and manual transmissions. It does not fit the CU2 2.4L four-cylinder TSX, which utilizes an internal timing chain.
Does this kit resolve timing rattle and cooling leaks, and is coolant included?
Yes, it addresses front-end pulley/tensioner noise and pump leaks, though coolant is not included. Replacing the water pump requires draining the cooling system, so you must refill and bleed the J35Z6 cooling circuit after torquing all fasteners to factory specification.
Are the hydraulic tensioner, front oil seals, and serpentine belt included?
Yes. All 9 service components—including the hydraulic tensioner (14520-RCA-A01), water pump gasket, two front camshaft seals, front crankshaft seal, and serpentine drive belt (38920-RCA-A01)—are included in the box; spark plugs are not included.
The Acura Precision Standard
Engineered to restore factory valvetrain synchronization and thermal stability, this comprehensive timing service kit protects high-revving J35Z6 internals under daily and spirited driving loads. Consolidating all front-cover wear components eliminates repeat teardown labor and preserves crisp throttle response.
Fitment
Fitment
|
Make |
Acura |
|---|---|
|
Engine Size |
|
|
Year |
|
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$180.95