Performance Water Pump Kit for Porsche Macan (2019-2026) 2.9L 3.0L

Complete Water Pump Service Kit for 2019-2026 Porsche Macan (95B)

What it Does: The Performance Water Pump Kit replaces the failure-prone mechanical cooling assembly and vacuum-actuated thermal control valves on the 2019-2026 Porsche Macan to restore cooling efficiency and prevent catastrophic coolant intrusion.

The Stock Porsche Macan 95B Cooling System Weakness

The factory cooling circuit on the EA839 2.9L and 3.0L turbocharged V6 is notorious for premature mechanical water pump failure. High heat cycling degrades internal shaft seals, driving coolant into the vacuum control lines through the thermal pneumatic control valve. This contamination damages the actuation solenoids, limits thermostat travel, causes boost control issues, and triggers persistent low-coolant or engine overheating faults under load.

The Engineering Solution

This coordinated service kit resolves EA839 cooling faults at the root. Featuring a high-flow aluminum housing and precision-balanced aluminum impeller, the belt-driven mechanical pump withstands continuous high-RPM thermal stress. Replacing the pump alongside matched OEM-spec solenoid valves, thermal pneumatic control valve, auxiliary coolant pipe, and fresh O-rings ensures the variable-displacement vacuum cooling circuit functions within factory tolerances without cross-system leakage.

What's Included

• 1 Engine Water Pump Assembly with Pulley
• 1 Thermostat
• 1 Water Pipe
• 1 Pulley
• 2 Solenoid Valves
• 1 Thermal Pneumatic Valve
• O-Ring and Fixing Bolt Hardware Set

Technical Specifications

Compatibility

• 2020-2026 Porsche Macan 2.9L V6 Gas Turbo (S, GTS, Turbo)
• 2019 Porsche Macan 3.0L V6 Gas Turbo (Macan S)

Frequently Asked Questions & Fitment Warnings

Does this fit the 95B Macan?

Yes, this is a direct fit for the 2019-2026 Porsche Macan equipped with the EA839 2.9L or 3.0L engine. Does not fit 2.0L inline-4 base models or pre-2019 first-generation 3.0L/3.6L engines.

Is a specialized bleeding procedure required after installation?

Yes, the cooling system must be vacuum-filled and bled according to Porsche service procedures to prevent air lock in the thermal pneumatic control circuit.

The Porsche Standard

Designed to satisfy stringent European performance tolerances, every component in this kit ensures precise mechanical integration, OEM sensor communication, and complete CEL-free operation under rigorous driving conditions.