Performance Timing Chain Kit for Mitsubishi Lancer Evolution (2008-2015) 2.0L
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
Direct-Fit Performance Timing Chain Kit for 2008-2015 Mitsubishi Lancer Evolution (CZ4A)
What it Does: This performance timing chain kit synchronizes crankshaft and dual-overhead camshaft rotation on the 2008-2015 Mitsubishi Lancer Evolution (CZ4A) equipped with the 4B11T 2.0L turbocharged engine to prevent valvetrain timing scatter and interference damage.
The Stock Mitsubishi Lancer Evolution Timing Drive Failure
Early factory timing chains on the CZ4A chassis equipped with the 4B11T 2.0L interference engine suffer from accelerated pin-and-bushing wear under high-RPM boost loads and thermal cycling. As the chain elongates and hydraulic tensioner MN183894 loses bleed-down resistance, cold-start slack allows the chain to whip against brittle polymer guide brackets. This excessive deflection retards cam phasing, triggering P0016 or P0011 correlation faults and risking catastrophic piston-to-valve contact if a tooth skips.
Common Symptoms of a Failing OEM Timing Chain Kit
- Check Engine Light / Correlation DTCs: Triggers P0016, P0017, or MIVEC cam-timing codes like P0011 and P0014 when chain stretch pushes crank-to-cam alignment past ECU tolerance thresholds.
- Cold-Start Metallic Rattle: Audible chain slap against the front timing cover during initial oil pressure buildup due to worn chain links and a fatigued hydraulic tensioner.
- Erratic Idle & Power Loss: Retarded camshaft timing disrupts MIVEC variable valve phasing, causing rough idle, sluggish turbo spool, or severe interference valvetrain damage if the chain jumps.
The Direct-Fit Reinforced Timing Chain Kit Solution
Replacing the stretched OEM assembly with this complete four-piece kit restores exact factory timing geometry across the 4B11T 2.0L valvetrain without front-cover modifications. Engineered to directly replace 1140A073, MN183894, MN183892, and MN183893 simultaneously, the hardened alloy-steel chain resists tensile elongation under sustained high-boost pressure. Coupled with a precision hydraulic tensioner and wear-resistant guide brackets, this matched set maintains consistent chain preload across all RPM ranges and eliminates repeat front-engine teardown labor.
What's Included
- 1 Timing Chain
- 1 Timing Chain Tensioner
- 2 Timing Chain Guide Brackets
Technical Specifications
| Fitment | 2008-2015 Mitsubishi Lancer Evolution |
|---|---|
| Engine / Chassis | 4B11T 2.0L Turbocharged I4 / CZ4A |
| Stock Engine Output | 291 hp / 300 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 1140A073, MN183894, MN183892, MN183893 |
Compatibility
- 2008 Mitsubishi Lancer Evolution — 2.0L Gas Turbocharged (Manual & Automatic)
- 2010-2015 Mitsubishi Lancer Evolution — 2.0L Gas Turbocharged (Manual & Automatic)
Frequently Asked Questions & Fitment Warnings
Does this fit the CZ4A Lancer Evolution?
Yes. This is a direct fit for the 2008 and 2010-2015 Mitsubishi Lancer Evolution (CZ4A) equipped with the 4B11T 2.0L engine, compatible with both manual and automatic transmissions. It does not fit regular non-Evolution Lancer models or 2009 model-year applications outside the listed fitment range.
Will this resolve P0016/P0011 cam-timing codes, and are water pumps or sprockets included?
Yes, replacing a stretched chain and weak tensioner resolves timing-correlation faults such as P0016 and P0011 caused by mechanical slack. Note that this four-piece kit includes only the timing chain (1140A073), tensioner (MN183894), and two guide brackets (MN183892, MN183893); a water pump, gaskets, and sprockets are not included.
What does installation require for this front-engine timing service?
This is a direct-fit front-engine service that requires supporting the engine, removing the timing covers, and aligning all factory timing marks. Install the new chain, tensioner, and guide brackets in factory order and torque all fasteners to Mitsubishi vehicle specifications; professional installation is recommended if you are not equipped for timing service.
The Mitsubishi Performance Standard
Engineered to handle the high-RPM thermal and torsional demands of the 4B11T platform, this timing kit preserves cam-to-crank synchronization for crisp throttle response and consistent boost delivery. Restore factory valvetrain reliability across your CZ4A Evolution without compromising OEM clearances.
Fitment
Fitment
|
Make |
Mitsubishi |
|---|---|
|
Engine Size |
|
|
Year |
|
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$121.95