Performance Timing Chain Kit for Mercedes Benz C-Class (2012-2016) 3.0L 3.5L
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
Direct-Fit Timing Chain & VVT Adjuster Kit for 2012-2016 Mercedes Benz C-Class (W204 / W205)
What it Does: This timing chain and camshaft VVT adjuster kit restores synchronized crankshaft-to-camshaft valve timing across both cylinder banks on the 2012-2016 Mercedes Benz C-Class (W204/W205) powered by the M276 3.0L/3.5L V6 engine.
The Stock Mercedes Benz C-Class Timing Chain & VVT Adjuster Failure
On the W204 and W205 chassis equipped with the M276 3.0L/3.5L V6, factory timing assemblies suffer from hydraulic tensioner bleed-down, timing chain elongation, and internal locking-pin wear inside the four camshaft VVT adjusters. During cold starts, insufficient residual oil pressure allows slack in the primary and secondary chains before hydraulic tension stabilizes. Combined with heat-cycled guide rail degradation, this mechanical play alters cam phasing and triggers camshaft correlation faults such as P0016, P0017, P0018, and P0019.
Common Symptoms of a Failing OEM Timing Chain Kit
- Check Engine Light / Cam Correlation DTCs: Fault codes P0016, P0017, P0018, P0019, or P0341 trigger when chain stretch or VVT adjuster slippage pushes cam-to-crank phase beyond ECU tolerances.
- Cold-Start Metallic Rattle: Audible slapping from the front timing covers for 2–5 seconds on startup caused by drained hydraulic tensioners and worn VVT locking pins.
- Rough Idle & Potential Valve Contact: Erratic cam timing causes misfires, poor throttle response, and risk of jumped timing resulting in severe internal engine damage.
The Direct-Fit Multi-Chain & VVT Adjuster Solution
This comprehensive timing service kit replaces every high-wear component in one matched assembly engineered to OEM dimensions for 2760503100, 0009930776, and 2760500117. It pairs four precision-machined camshaft VVT adjusters with hardened steel timing chains, primary sprockets, and three hydraulic tensioners to maintain consistent chain preload across all RPM ranges. Reinforced guide rails and slides eliminate chain whip and restore accurate valve phasing without modifying factory timing cover clearances or oil gallery geometry.
What's Included
- 4 Camshaft VVT Adjusters
- 2 Large Timing Chains with Metal Guide Assemblies
- 1 Front Timing Chain
- 1 Oil Pump Timing Chain
- 2 Dark Guide Rails
- 2 White Guide Slides
- 1 Yellow Guide
- 1 Small Black Guide
- 2 Sprockets
- 3 Timing Chain Tensioners
Technical Specifications
| Fitment | 2012-2016 Mercedes Benz C-Class |
|---|---|
| Engine / Chassis | M276 3.0L / 3.5L V6 / W204, W205 |
| Stock Engine Output | 302 hp / 273 lb-ft (3.5L) | 329–362 hp / 354–384 lb-ft (3.0L) |
| Installation Type | Direct Bolt-On OEM Replacement (Factory Timing Locations) |
| Replaces OEM Part # | 2760503100, 0009930776, 2760500117 |
Compatibility
- 2015–2016 Mercedes Benz C-Class 3.0L Gas Turbocharged (W205)
- 2012–2014 Mercedes Benz C-Class 3.5L Flex Naturally Aspirated (W204)
- 2012–2015 Mercedes Benz C-Class 3.5L Gas Naturally Aspirated (W204)
Frequently Asked Questions & Fitment Warnings
Does this fit the W204 / W205 C-Class?
Yes. This is a direct fit for the 2012-2016 Mercedes Benz C-Class equipped with the M276 3.0L/3.5L V6 engine. Diesel applications (such as ML350 or CLS350 diesel) and non-listed engines are strictly excluded; verify exact year and liter displacement before ordering.
Will this clear cam timing codes like P0016/P0017, and is a water pump included?
Yes, replacing all four VVT adjusters, chains, tensioners, and guides resolves the mechanical root cause of cold-start rattle and correlation faults. A water pump is not included in this kit, and all fasteners must be torqued to factory M276 specifications.
Are timing locking tools included for installation?
No. Timing locking tools are not included with this set; professional installation is recommended since the job requires engine support, front cover removal, and locking the engine at factory timing marks.
The Mercedes Benz Precision Standard
Modern Euro V6 platforms like the M276 rely on exact oil-pressure-driven cam phasing for emissions compliance, ECU stability, and fault-free operation. Replacing the complete chain drive and all four VVT adjusters together restores factory timing accuracy and prevents recurring CEL triggers.
Fitment
Fitment
|
Make |
Mercedes Benz |
|---|---|
|
Engine Size |
|
|
Year |
|
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$1,033.95