Performance Timing Chain Kit for Chevrolet Camaro (2010-2015) 3.6L
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
Direct-Fit Performance Timing Chain Kit for 2010-2015 Chevrolet Camaro (Zeta)
What it Does: This complete Timing Chain Kit synchronizes the crankshaft and dual-overhead camshafts on the 2010-2015 Zeta Chevrolet Camaro equipped with the 3.6L High Feature V6 engine to maintain precise valve timing and prevent cam-correlation faults.
The Stock Chevrolet Camaro Timing Chain Failure
On the Zeta platform equipped with the LLT or LFX 3.6L High Feature V6, factory timing chains experience accelerated pin wear and elongation under extended oil change intervals and high-RPM thermal cycling. Once the primary or secondary chains stretch beyond tensioner travel limits, hydraulic tensioners lose oil pressure control and composite guide faces fracture. This mechanical slack alters camshaft-to-crankshaft phasing, triggering P0008, P0016, P0017, P0018, or P0019 cam-correlation faults and risking severe piston-to-valve interference.
Common Symptoms of a Failing OEM Timing Chain Assembly
- Check Engine Light & Cam-Correlation DTCs: Triggers P0008, P0016, P0017, P0018, or P0019 when stretched chains pull camshaft phasers outside ECM timing windows.
- Cold-Start Metallic Rattle: Audible slapping noise from the front timing cover during startup before oil pressure stabilizes weak tensioners against worn guides.
- Rough Idle & Timing Jump Risk: Erratic valve timing reduces low-end torque, increases fuel consumption, and risks skipping teeth across the crankshaft or idler sprockets.
The Direct-Fit High-Strength Timing Chain Kit Solution
This direct-fit timing chain kit replaces the factory primary chain, dual secondary chains, crank sprocket, dual idler assemblies, and four guides and tensioners as a matched system to restore OE cam synchronization on LLT and LFX engines. Manufactured to OEM dimensional tolerances with hardened alloy steel sprockets, pre-stretched link plates, and wear-resistant composite guide rails, it eliminates timing slack and stabilizes valve timing under cold-start and high-load operation. Engineered to replace 12600461, 12609258, and TKGM10436L without front cover modification.
What's Included
- 1 Primary Timing Chain
- 2 Secondary Timing Chains
- 1 Crankshaft Sprocket
- 2 Idler Sprocket Assemblies
- 4 Timing Chain Guides and Tensioners
- Note: Water pump is not included in this kit.
Technical Specifications
| Fitment | 2010-2015 Chevrolet Camaro |
|---|---|
| Engine / Chassis | 3.6L High Feature V6 (LLT / LFX) / Zeta (5th Gen) |
| Stock Engine Output | 312–323 hp / 278 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 12600461, 12609258, TKGM10436L |
Compatibility
- 2010-2015 Chevrolet Camaro — 3.6L Gas Naturally Aspirated (Manual and Automatic Transmissions)
Frequently Asked Questions & Fitment Warnings
Does this fit the Zeta Camaro?
Yes. This is a direct fit for the 2010-2015 Chevrolet Camaro equipped with the 3.6L High Feature V6 (LLT / LFX) engine across both manual and automatic transmissions. This kit does not fit 2.4L, 2.8L, or V8 engines, nor does it fit Chrysler 3.6L Pentastar applications.
Will this resolve cam-correlation DTCs like P0008 or P0016, and is a water pump included?
Yes, replacing worn chains, guides, and tensioners resolves mechanical timing stretch causing P0008 and P0016-P0019 faults, provided cam phasers and VVT solenoids are functional. A water pump is not included; this package contains the timing chains, guides, tensioners, and sprockets only.
What is required for installation on the 3.6L V6?
This is a comprehensive front-engine timing service requiring engine support and front timing cover removal. Align all factory timing marks during assembly of the primary, secondary, and idler components, and torque every fastener strictly to GM factory specifications.
The Chevrolet Performance Standard
Restoring precise valve timing geometry keeps your Zeta Camaro responsive across the entire rev range while eliminating destructive cold-start chain slap. Built for accurate mechanical synchronization and sustained high-RPM flow efficiency, this kit delivers dependable valvetrain stability under spirited street and track operation.
Fitment
Fitment
|
Make |
Chevrolet |
|---|---|
|
Engine Size |
|
|
Year |
|
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$445.95