Skip to product information
1 of 6

Performance Timing Chain Kit for Cadillac SRX (2007-2015) 3.0L 3.6L



Regular price $445.95
Sale price $445.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Timing Chain Kit for 2007-2015 Cadillac SRX (GMT265 / GMT166)

What it Does: This performance timing chain kit restores precise crankshaft-to-camshaft synchronization on the 2007-2015 Cadillac SRX (GMT265 and GMT166) equipped with GM LY7, LF1, and LFX 3.0L/3.6L High Feature V6 engines by replacing stretched chains, fatigued tensioners, worn guides, and sprockets.

The Stock Cadillac SRX Timing System Failure

On GMT265 and GMT166 SRX models equipped with LY7, LF1, and LFX V6 engines, oil aeration and thermal cycling accelerate chain pin wear and elongation. Once the primary or secondary chains stretch beyond tensioner limits, hydraulic tensioners bleed down during cold starts and nylon guide faces fracture. Resulting slack creates camshaft-to-crankshaft phase drift, triggering P0008, P0016, and P0017 correlation codes or severe valvetrain damage if timing jumps.

Common Symptoms of a Failing OEM Timing Chain System

  • Check Engine Light / Cam-Correlation DTCs: Triggers codes such as P0008, P0009, P0016, P0017, P0018, or P0019 when stretched chains pull camshaft phasers out of ECU target windows.
  • Cold-Start Metallic Rattle: Audible chain slap from the front timing cover during the first few seconds after ignition before oil pressure stabilizes in worn hydraulic tensioners.
  • Rough Idle & Drivability Loss: Retarded cam timing degrades cylinder scavenging, causing sluggish throttle response, misfires, or complete engine shutdown if a chain skips teeth.

The Direct-Fit Multi-Chain Timing Service Solution

Engineered as a complete front-end timing overhaul for OE part numbers 12600461, 12609258, and TKGM10436L, this kit replaces every wear-prone drive component simultaneously. Hardened steel primary and secondary chains resist tensile elongation under sustained high-RPM oil shear, while precision-machined crank and idler sprockets prevent tooth-profile mismatch. Reinforced composite guides and hydraulic tensioners maintain constant chain geometry across cold starts, installing directly into factory GMT265 and GMT166 timing cover bosses without modification.

What's Included

  • 1x Primary Timing Chain
  • 2x Secondary Timing Chains
  • 1x Crankshaft Sprocket
  • 2x Idler Sprocket Assemblies
  • 4x Timing Chain Guides and Tensioners

Technical Specifications

Fitment 2007-2015 Cadillac SRX
Engine / Chassis 3.0L (LF1) & 3.6L (LY7 / LFX) High Feature V6 / GMT265 & GMT166
Stock Engine Output 255–308 hp / 223–265 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 12600461, 12609258, TKGM10436L

Compatibility

  • 2010-2011 Cadillac SRX — 3.0L Gas Naturally Aspirated (LF1)
  • 2012-2015 Cadillac SRX — 3.6L Flex Naturally Aspirated (LFX)
  • 2007-2009 Cadillac SRX — 3.6L Gas Naturally Aspirated (LY7)
  • 2014-2015 Cadillac SRX — 3.6L Gas Naturally Aspirated (LFX)

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT265 and GMT166 SRX?

Yes. This is a direct fit for the 2007-2015 Cadillac SRX equipped with the 3.0L (LF1) and 3.6L (LY7 / LFX) High Feature V6 engines across both manual and automatic transmissions. This kit will NOT fit 2.4L, 2.8L, or Chrysler 3.6L Pentastar engines.

Will this clear P0008/P0016 cam-correlation codes, and is a water pump included?

Yes, replacing stretched chains and fatigued tensioners resolves mechanical timing drift triggering P0008, P0016, and P0017 faults once cam marks are properly indexed. However, a water pump is not included—this kit supplies the primary chain, secondary chains, sprockets, guides, and tensioners matching OE references 12600461, 12609258, and TKGM10436L.

What does installation require for the 3.0L and 3.6L timing service?

Installation requires a comprehensive front-engine timing cover service. You must support the engine, remove the front cover, align all factory crankshaft and camshaft timing marks, and torque fasteners to GM factory specifications; professional installation is recommended if you are not equipped for timing service.

The Cadillac Precision Standard

Built to restore factory valvetrain synchronization and ECU timing accuracy on GMT265 and GMT166 platforms, this matched assembly eliminates cold-start rattle and cam-correlation fault codes. Replacing chains, guides, tensioners, and sprockets together ensures long-term mechanical reliability under daily driving demands.




Fitment

Make

Cadillac

Engine Size

  • 3.0L
  • 3.6L

Year

  • 2007
  • 2008
  • 2009
  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Performance Timing Chain Kit for Cadillac SRX (2007-2015) 3.0L 3.6L

$445.95