Performance Timing Chain Kit for BMW X4 (2015-2017) 3.0L
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
Direct-Fit Timing Chain & VANOS Kit for 2015-2017 BMW X4 (F26)
What it Does: A complete front-engine timing service kit for the 2015-2017 BMW X4 (F26) N55 3.0L inline-six that synchronizes crankshaft-to-camshaft phase and restores factory VANOS variable valve timing control.
The Stock BMW X4 Timing Drive & VANOS Failure
On the F26 chassis powered by the N55 3.0L turbocharged inline-six, sustained oil heat cycles and extended drain intervals degrade hydraulic tensioner pressure and embrittle the polymer chain guide rails. As the timing chain elongates and the intake or exhaust VANOS camshaft adjustment units wear internally, cam-to-crank phase drifts outside ECU tolerance. This mechanical slack triggers camshaft correlation faults such as P0012, P0015, and P0016, risking skipped timing teeth and severe valvetrain interference if ignored.
Common Symptoms of a Failing OEM Timing Chain Kit
- Check Engine Light & VANOS Faults: Triggers camshaft position and timing correlation DTCs such as P0012, P0015, P0016, or P0340 due to sluggish adjuster response or chain stretch.
- Cold-Start Metallic Rattle: Audible chain slap against fatigued guide rails during initial cranking before engine oil pressure stabilizes the hydraulic tensioner.
- Rough Idle & Power Loss: Erratic cam phasing causes misfires, sluggish throttle response, and reduced low-end boost efficiency.
The Direct-Fit Timing Chain & VANOS Solution
Replacing the chain, guides, tensioner, sprocket, and both intake and exhaust VANOS camshaft adjustment units simultaneously eliminates cumulative wear across the entire front timing assembly. Precision-machined sprocket teeth and wear-resistant guide rails maintain stable chain geometry across high-RPM load transitions. Engineered as a direct OEM-spec replacement for part numbers 11317502180 and 11317584084, every component installs into factory mounting bosses using standard TDC locking procedures and OEM torque specifications.
What's Included
- 2 Camshaft Adjustment Units (Intake and Exhaust)
- 1 Timing Chain
- 1 Timing Chain Rail and Guide Assembly
- 1 Timing Chain Rail
- 1 Timing Chain Tensioner
- 1 Sprocket
Technical Specifications
| Fitment | 2015-2017 BMW X4 |
|---|---|
| Engine / Chassis | N55 3.0L Inline-Six Turbo / F26 |
| Stock Engine Output | 300-355 hp / 300-343 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (Requires TDC Timing Lock) |
| Replaces OEM Part # | 11317502180, 11317584084 |
Compatibility
- 2015-2017 BMW X4 — 3.0L Gas Turbocharged
Frequently Asked Questions & Fitment Warnings
Does this fit the F26 X4?
Yes. This is a direct fit for the 2015-2017 BMW X4 equipped with the N55 3.0L gas turbocharged inline-six engine. This kit is not listed for 2.0L N20 or 2.5L engines; confirm engine displacement before ordering.
Are both camshaft adjustment units included, and will this resolve VANOS timing codes?
Yes. Both the intake and exhaust VANOS camshaft adjustment units are included alongside the chain, rails, tensioner, and sprocket to eliminate mechanical slack causing P0012, P0015, and P0016 faults. After locking the N55 3.0L at TDC and torquing all fasteners to factory specifications, clear stored ECU adaptations.
Does this kit include a water pump or single-use bolt and washer hardware?
No. This package contains the timing chain, guide assembly, rail, tensioner, sprocket, and both camshaft adjustment units only; a water pump and bolt/washer hardware pack are not included. Source replacement factory torque-to-yield fasteners before beginning front-engine disassembly.
The BMW Precision Standard
Built to restore exact valve-timing synchronization and ECU-commanded VANOS responsiveness on the F26 platform, this comprehensive timing kit keeps your N55 3.0L operating free of timing faults and cold-start rattle. Confirm model year and 3.0L displacement, then pair with fresh factory fasteners for a reliable, long-term front-engine overhaul.
Fitment
Fitment
|
Make |
BMW |
|---|---|
|
Engine Size |
|
|
Year |
|
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$418.95