Performance Air Intake W/Heat Shield for Chrysler 300 (2011-2023) with 3.6L V6 Engine Blue

The Chrysler 300 has the presence of a heavyweight contender, but the stock induction system on the V6 keeps it fighting with one hand tied behind its back. Your 3.6L Pentastar is capable of much more, but it's currently suffocated by a factory airbox designed for silence, not speed.

Performance Cold Air Intake w/ Heat Shield for Chrysler 300 (3.6L Pentastar V6)

If you drive a 2011–2023 Chrysler 300, you know the chassis is solid and the ride is composed. However, the 3.6L Pentastar V6 often feels restrained, especially off the line. This is largely due to the OEM intake system. The factory setup utilizes a maze of plastic tubing, baffles, and resonators intended to mute induction noise. While this keeps the cabin whisper-quiet, it creates turbulence and restricts the volume of air reaching the combustion chamber. In a heavy sedan like the 300, that restriction translates to throttle lag.

This Performance Air Intake System completely replaces that restrictive architecture with a mandrel-bent T304 aluminum tube and a high-flow conical filter. The kit includes a specific Chrome Blue filter element, adding a distinct custom look to your engine bay that pops against the aluminum piping. More importantly, this system features a dedicated heat shield. The Pentastar engine bay can get extremely hot; without a shield, an open filter would just suck in hot, stagnant air. The shield seals against the engine bay, ensuring the intake draws cooler, denser air from outside the hot zone.

The result is a transformation in both throttle response and sound. The lag is minimized, giving you linear power delivery when you merge or pass. Acoustically, the car remains civilized at cruising speeds, but when you step on the gas, you get a deep, throaty induction growl that matches the aggressive exterior styling of the 300. It’s the perfect upgrade for the owner who wants their V6 to have the attitude of a V8.

Why You Need This Upgrade

• Cold Air Isolation: The included heat shield blocks radiant engine heat, ensuring the filter pulls in cooler, oxygen-rich air for maximum power.
• Custom Engine Bay Styling: Features a polished T304 aluminum tube and a striking Chrome Blue air filter for a show-quality look.
• Unleash the Sound: Removes factory resonators to amplify the natural, deep tone of the Pentastar V6 under hard acceleration.
• Optimized Airflow: Smooth aluminum piping eliminates the turbulence caused by the ribbed plastic factory intake tube.
• Lifetime Maintenance: The high-flow synthetic filter is washable and reusable (50,000-mile cleaning interval), saving money on replacements.

Installation Notes

This intake is designed as a direct bolt-on replacement for the factory airbox using basic hand tools. No cutting or drilling is required. Crucial Step: You must disconnect the negative battery terminal before starting the installation. Leave it disconnected for at least 15 minutes. This resets the ECU (Engine Control Unit), clearing old fuel trim data and forcing the computer to learn the new airflow parameters immediately. Failure to reset the battery may result in a check engine light or rough idle.

Replaces These OEM Applications

• 2011-2023 Chrysler 300 (3.6L V6 Engine)

Give your Chrysler 300 the airflow it needs and the sound it deserves. Bolt on the heat shield, lock in the cool air, and enjoy a more responsive drive.