Cold Air Intake for Chrysler 300 (2011-2020) 3.6L Engine - Black

Optimize the Pentastar V6: High-Flow Induction for the Chrysler 300

Who It’s For: Engineered for Chrysler 300 owners running the 3.6L Pentastar V6 powerplant who are tired of the stock sluggishness and want to hear what their engine is actually capable of.

The Symptom: The factory intake on the 3.6L Pentastar is designed for silence and cost-efficiency, not performance. It uses a restrictive resonator box and accordion-style rubber tubing that creates massive air turbulence, choking the engine’s throttle response when you try to merge or pass on the highway. In a heavy chassis like the Chrysler 300, this restriction makes the car feel disconnected and lazy in the low-to-mid RPM range.

The Engineering Fix: This system replaces that restrictive plastic plumbing with a mandrel-bent T-304 aluminum tube. By smoothing out the airflow path and utilizing a heat shield to isolate the filter from engine bay soak, we significantly increase the oxygen density entering the combustion chamber. This isn’t just about volume; it’s about velocity. By straightening the air path, we reduce the pumping losses of the engine, resulting in a sharper throttle snap and a sophisticated induction growl that the 300 should have had from the factory.

Why Mechanics Choose This Kit

• Torque Where It Matters: Expect a 7-10% increase in horsepower and 6-8% increase in torque, specifically targeting the mid-range where this heavy sedan needs it most for overtaking.
• Thermal Management: The included heat shield helps block radiant heat from the radiator and engine block, ensuring the 3.6L V6 pulls in cooler, denser air rather than the hot, stagnant air trapped under the hood.
• Sustainable Performance: Features a high-quality washable and reusable cone air filter. You’ll never need to buy a paper filter again; simply clean, oil, and reinstall to maintain peak flow.

Technical Specifications

Compatibility & OEM Reference

Fits the Following Vehicles:

• 2011 Chrysler 300 3.6L V6
• 2012 Chrysler 300 3.6L V6
• 2013 Chrysler 300 3.6L V6
• 2014 Chrysler 300 3.6L V6
• 2015 Chrysler 300 3.6L V6
• 2016 Chrysler 300 3.6L V6
• 2017 Chrysler 300 3.6L V6
• 2018 Chrysler 300 3.6L V6
• 2019 Chrysler 300 3.6L V6
• 2020 Chrysler 300 3.6L V6

Included Components:

Aluminum Intake Pipe, High-Flow Cone Filter, Heat Shield, Couplers, Clamps, and Mounting Hardware.

The Performance Promise

Buy with confidence. This kit is designed for a straightforward installation that typically takes less than an hour with basic hand tools. We recommend disconnecting the battery for 10 minutes post-install to allow the ECU to recalibrate its fuel trims for the increased airflow. Backed by real automotive experts and fast shipping.