Performance Air Intake for Toyota Camry 2007-2011 / Venza 2009-2015 3.5L V6
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Maximize Airflow and Throttle Response for Your 2GR-FE Powered Camry & Venza
Who It’s For: Designed specifically for Toyota Camry and Venza owners running the legendary 2GR-FE 3.5L V6 engine who want to improve engine efficiency and sound.
The Problem: The stock airbox on the 2GR-FE is designed primarily for sound suppression and low-cost maintenance. By using restrictive paper filters and convoluted plastic tubing, the factory setup creates significant turbulence and airflow restriction. This "chokes" the engine’s ability to breathe during high-load situations, leading to sluggish throttle response and heat soak in the engine bay.
The Solution: We engineered this performance intake to replace the restrictive factory components with smooth-bore, polished aluminum piping and a high-flow washable filter. This setup allows the 2GR-FE to draw in a higher volume of air with less resistance, resulting in a measurable increase of 10 horsepower and 10 lb-ft of torque, while giving the engine a much more aggressive tone under acceleration.
Why This is the Ultimate Upgrade
- Enhanced Power Delivery: Dyno-tested gains of up to 10 HP and 10 TQ by reducing intake restriction and improving air velocity.
- Lifetime Filtration: Includes a high-performance washable cone filter. You’ll never have to buy a cheap paper filter again; simply clean it with a standard K&N or AEM cleaning kit and reuse it.
- Heat Dissipation & Aesthetics: The polished aluminum piping doesn’t just look better than stock black plastic; it helps dissipate heat faster and provides a smooth internal surface for laminar airflow.
- Simple Bolt-On Install: This is a complete kit with no additional parts needed. It utilizes factory mounting points for a straightforward installation that can be done in a driveway with basic hand tools.
Technical Specifications
| Fitment | 2007-2011 Toyota Camry / 2009-2015 Toyota Venza |
| Engine Family | Toyota 2GR-FE V6 |
| Factory Ratings | Approx. 268 HP / 248 lb-ft Torque |
| Material | Mirror Polished Aluminum |
Compatibility & OEM Reference
Fits the Following Vehicles:
- 2007 Toyota Camry 3.5L V6
- 2008 Toyota Camry 3.5L V6
- 2009 Toyota Camry 3.5L V6
- 2010 Toyota Camry 3.5L V6
- 2011 Toyota Camry 3.5L V6
- 2009 Toyota Venza 3.5L V6
- 2010 Toyota Venza 3.5L V6
- 2011 Toyota Venza 3.5L V6
- 2012 Toyota Venza 3.5L V6
- 2013 Toyota Venza 3.5L V6
- 2014 Toyota Venza 3.5L V6
- 2015 Toyota Venza 3.5L V6
Interchange Part Numbers:
2GR-FE-INTAKE-V6, 2007-2011-CAMRY-35, 2009-2015-VENZA-35
The Performance Promise
Buy with confidence. As specialists in Toyota performance, we know the 2GR-FE platform inside and out. This kit is designed to provide a perfect balance of daily drivability and sportier performance. Backed by real automotive expertise and fast shipping to get you back on the road with more power.
Common Questions
Will this intake fit my 2012 Toyota Camry 3.5L V6?
This kit is built specifically for the 2007-2011 Toyota Camry 3.5L V6 and 2009-2015 Toyota Venza 3.5L V6.
Does this fit the four-cylinder Camry or Venza?
It is engineered specifically for models equipped with the 2GR-FE 3.5L V6 engine.
What is included in the kit?
This is a complete bolt-on kit featuring mirror-polished aluminum intake piping and a washable, reusable high-flow cone filter.
How do I maintain the air filter?
The included cone filter is washable and reusable. You can clean and service it using a standard K&N or AEM filter cleaning kit.
Do I need extra parts or modifications to install this?
The kit uses factory mounting points and comes with everything needed for a straightforward driveway install using basic hand tools.
Fitment
Fitment
Installation & Tools
Installation & Tools
DIY Guide: Performance Air Intake for Toyota Camry 2007-2011 / Venza 2009-2015 3.5L V6 for 2007-2015 Toyota Camry Venza 3.5L
Required Tools
- 10mm Socket, Ratchet, and 6-inch Extension
- 8mm Nut Driver or Flathead Screwdriver
- #2 Phillips Head Screwdriver
- Needle-Nose Pliers
Ensure the factory rubber O-ring on the Mass Airflow (MAF) sensor stays intact during transfer. Never touch the delicate internal sensing wires, and ensure the sensor seats completely flush against the polished aluminum bung to prevent vacuum leaks and lean fuel codes.
Phase 1: Factory Component Removal
- Disconnect the negative battery terminal using a 10mm socket. Pull upward on the plastic engine cover to release it from its mounting grommets.
- Unplug the MAF sensor harness clip. Use a #2 Phillips screwdriver to remove the two MAF mounting screws, pull the sensor straight out, and set it somewhere clean.
- Use needle-nose pliers to slide back the spring clamps on the crankcase breather and vacuum hoses attached to the stock intake tube, then pull the hoses free.
- Loosen the 10mm clamp at the throttle body, unclip the upper airbox lid, and lift the factory intake tube and upper lid assembly out of the engine bay.
Phase 2: Aftermarket Installation
- Slide the supplied red silicone coupler and two worm-gear clamps onto the throttle body. Snug the inner clamp using an 8mm nut driver, leaving the outer clamp loose for adjustment.
- Insert the factory MAF sensor into the welded bung on the polished aluminum intake pipe and secure it using the provided screws.
- Slip the polished aluminum pipe into the red silicone coupler. Reconnect the breather and vacuum hoses onto the welded ports underneath the pipe, securing them with their clamps.
- Install the open-element red cone filter with chrome trim onto the end of the pipe. Verify clearance around the black metal brace bar, tighten all clamps with an 8mm nut driver, reconnect the MAF plug and battery, and reinstall the engine cover.
Disclaimer: This is a general guide provided for the 2007-2015 Toyota Camry Venza 3.5L. Always refer to your factory service manual for exact torque specifications and safety procedures.
Warranty
Warranty
