Performance Air Intake for Honda Civic (1992-2000) 1.6L L4 Engine - Blue

Vehicle Fitment

• 1992–1995 Honda Civic (All Models Except Si) – EG Chassis
• 1996–2000 Honda Civic (All Models Except Si)
• Compatible with D16Y8 engines only
• Not compatible with D16Y7 engines (CX and DX trims)

Performance & Engineering

Dyno-Proven Performance: This intake design has demonstrated gains of up to 6.5 wheel horsepower and 7.4 ft-lb of torque during dyno testing on a nearly stock B16A engine. Actual results will vary depending on engine configuration, vehicle condition, and supporting modifications.

Flared Intake Tube Design: The flared intake geometry allows the engine to draw in a greater volume of air with reduced turbulence. Increased airflow velocity supports improved throttle response and higher horsepower output throughout the RPM range.

Power Chamber Design: The high-volume power chamber delivers noticeable gains across the entire power band while reducing the likelihood of hydro-lock. This design balances airflow performance with engine safety.

Construction & Materials

Advanced Thermo-Poly Construction: Manufactured from high-strength thermo-poly composite material, this intake offers excellent heat resistance, durability, and lightweight performance compared to conventional intake materials.

Thick-Wall Design: With a 5mm pipe thickness, the intake maintains structural integrity under heat and vibration while providing smooth internal airflow.

Specifications

• Inlet Diameter: 3 inches
• Outlet Diameter: 4.25 inches
• Pipe Thickness: 5mm
• Material: Thermo-Poly Composite
• Color: Black

Features & Benefits

• Improves airflow efficiency and throttle response
• Dyno-proven horsepower and torque gains
• Flared intake tube for increased air volume and velocity
• Delivers gains across the entire RPM range
• Reduces intake restriction versus factory components
• Integrated power chamber helps reduce hydro-lock risk
• Lightweight, high-strength composite construction
• Enhances engine bay appearance with a bold performance look
• Designed specifically for Honda Civic D16Y8 applications

Installation

• Direct-fit replacement for factory intake components
• No cutting or drilling required
• Uses factory mounting points where applicable
• Basic hand tools required

Installation Note: Always install on a completely cool engine. Verify engine code prior to installation to ensure compatibility with D16Y8 engines only.

Filter Maintenance

Inspection Schedule: Inspect the air filter every 5,000 miles and clean if necessary. Driving conditions such as dusty environments, urban traffic, or spirited driving may require more frequent inspection and cleaning.

Cleaning Procedure: Remove the filter from the intake tube and gently tap to remove loose debris. Apply an appropriate air filter cleaning solution to both the inside and outside of the filter element, working it into the filter media. Allow the cleaner to soak for approximately 10 minutes. Rinse thoroughly with low-pressure water from the clean side outward until water runs clear. Shake off excess water and allow the filter to air dry completely in a clean environment. Once fully dry, apply air filter oil evenly according to product specifications and allow the oil to wick through the filter material for approximately 20 minutes before reinstalling. Ensure the filter is completely dry before applying oil.

Sound Characteristics

Induction Sound: The flared intake tube and power chamber design produce a deeper, more aggressive intake sound during acceleration while remaining controlled during normal driving.