Performance Air Intake for Ford Bronco (1994-1996) 5.0L 5.8L Engines

Maximize Breathability for Your 1994-1996 Ford Bronco Windsor V8

Who It’s For: Designed specifically for late-model OBS Ford Bronco owners running the fuel-injected Windsor V8 engine family, specifically those equipped with the factory Mass Air Flow (MAF) sensor setup.

The Problem: The factory intake system on the Windsor V8 is a maze of restrictive plastic boxes and corrugated rubber tubing. This design creates significant air turbulence and heat soak, which limits the engine’s potential. On these 1994-1996 models, the stock air-box also makes it harder for the MAF sensor to get a clean, high-velocity reading, often resulting in sluggish throttle response and a muffled exhaust note.

The Solution: We engineered this aluminum intake system to provide a direct, smooth-bore path for oxygen to reach the upper intake manifold. By replacing the restrictive factory baffles, we allow the Windsor V8 to pull air more efficiently, correcting the inherent airflow limitations and delivering a much more aggressive engine tone under load.

Why This is the Ultimate Upgrade

• Optimized Velocity: The lightweight aluminum piping reduces intake temperatures and increases air velocity, contributing to gains of up to 10% in horsepower and torque.
• Serviceable Filtration: Features a high-flow, washable cotton-gauze filter that provides superior filtration compared to paper elements.
• True Bolt-On Design: Engineered to integrate with your factory MAF sensor and mounting points. This is a 60-minute installation that requires only basic hand tools. Consult your dealer about warranty coverage for aftermarket parts.

Technical Specifications

Compatibility & OEM Reference

Fits the Following Vehicles:

• 1994 Ford Bronco 5.0L V8 (MAF Models)
• 1994 Ford Bronco 5.8L V8 (MAF Models)
• 1995 Ford Bronco 5.0L V8 (MAF Models)
• 1995 Ford Bronco 5.8L V8 (MAF Models)
• 1996 Ford Bronco 5.0L V8 (MAF Models)
• 1996 Ford Bronco 5.8L V8 (MAF Models)

Interchange Reference:

1994, 1995, 1996, 5.0, 5.8, V8, MAF, T304-ALUM-BLK, 302-WIND-INTK, 351-WIND-INTK

The Performance Promise

Buy with confidence. As specialists in OBS Ford performance, we know that these 5.0L and 5.8L engines thrive when they can breathe. We recommend disconnecting your battery for 10 minutes after installation to allow the ECU to relearn the new air-to-fuel trim parameters. Backed by real-world testing and fast shipping.

Common Questions

Will this intake fit my 1994-1996 Ford Bronco with a 5.0L or 5.8L V8?
Yes, this short ram air intake is engineered specifically for 1994, 1995, and 1996 Ford Bronco 5.0L and 5.8L Windsor V8 models equipped with the factory Mass Air Flow (MAF) sensor.

Does my Bronco need to have a factory MAF sensor for this kit to work?
This intake is built specifically for 1994-1996 Ford Bronco 5.0L and 5.8L trucks that use the factory Mass Air Flow (MAF) sensor setup and integrates directly with your stock MAF housing and mounting points.

What is included with this air intake system?
The system includes smooth-bore lightweight aluminum intake piping and a high-flow, washable cotton-gauze air filter designed to bolt up to your factory MAF sensor and mounting locations.

How long does installation take and what tools are needed?
Installation takes about 60 minutes using basic hand tools. Disconnecting the battery for 10 minutes after installation is recommended so the ECU can relearn the updated airflow parameters.

Can the air filter be cleaned and reused?
Yes, the kit features a serviceable, washable cotton-gauze filter element that can be cleaned and reused rather than replaced like a stock paper filter.