Performance Air Filter Kit for Ferrari SF90 & 849 Testarossa (2019-2026)

High-Flow BMC Performance Air Filter for Ferrari SF90 (F173)

What it Does: The BMC performance air filter replaces the restrictive factory paper element on the Ferrari SF90 to maximize intake airflow, reduce pressure drop across the intake tract, and sharpen throttle response.

The Stock Ferrari SF90 Intake Restriction

The factory intake system on the F173 chassis relies on standard cellulose paper filtration. While functional for standard service intervals, dense paper media creates significant flow resistance when the twin-turbocharged 4.0L V8 demands maximum charge volume. Under high boost, stock paper elements exhibit pressure drop that strains compressor efficiency, limits peak airflow, and increases intake depression.

Additionally, disposable paper degrades under heat cycling and requires complete replacement once saturated with particulate matter.

The Engineering Solution

Engineered as a direct drop-in replacement, this BMC panel filter utilizes multi-layered cotton gauze impregnated with low-viscosity lubricating oil. The media is encapsulated within an epoxy-coated alloy mesh and secured by a one-piece continuous polyurethane frame molded without welded joints to prevent perimeter air bypass or thermal deformation.

This structural design delivers superior CFM throughput while maintaining filtration efficiency down to 7 microns, safeguarding the F154FA compressor wheels from micro-abrasives without requiring MAF recalibration.

Technical Specifications

Compatibility & OEM Reference

Fits the following vehicles (BMC fitment data):

• Ferrari SF90 4.0 V8 XX Spider [Full Kit] (1030 HP) | 2023+
• Ferrari SF90 4.0 V8 XX Stradale [Full Kit] (1030 HP) | 2023+
• Ferrari SF90 4.0 V8 Spider [Full Kit] (1000 HP) | 2020+
• Ferrari SF90 4.0 V8 Stradale [Full Kit] (1000 HP) | 2019+
• Ferrari 849 4.0 V8 Testarossa Spider [Full Kit] (1050 HP) | 2026+
• Ferrari 849 4.0 V8 Testarossa [Full Kit] (1050 HP) | 2026+

BMC marks these applications as [Full Kit].

OEM Cross Reference (BMC): FERRARI 815017 (EU), FERRARI 865146 (US)

Frequently Asked Questions & Fitment Warnings

Does this fit the F173 SF90?

Yes, this is a direct fit for the Ferrari SF90 Stradale, Spider, and XX variants equipped with the F154FA twin-turbo hybrid powertrain.

Does this filter require an ECU tune or cause check engine lights?

No, this drop-in filter maintains factory airbox volumetric dynamics and functions completely within OEM closed-loop fuel trim parameters without triggering a CEL.

The Ferrari Caliber

High-output European twin-turbo hybrid platforms operate within razor-thin volumetric tolerances; this filter ensures uncompromised charge air volume without sacrificing OEM sealing integrity or downstream sensor safety.