Performance Air Filter for Ferrari 488 GTB, Pista & F8 Tributo (2015-2022)

High-Flow BMC Performance Air Filter for Ferrari 488 & F8 (F142M)

What it Does: The BMC performance air filter drops directly into the OEM airbox of the Ferrari 488 and F8 to reduce intake tract restriction, optimize volumetric efficiency, and sharpen turbocharger spool response.

The Stock Ferrari 488 & F8 Intake Restriction

Factory intake systems on the F142M platform rely on dense cellulose paper filter elements. While adequate for baseline road dust separation, compressed paper creates significant flow resistance across the intake tract under peak boost. On the twin-turbocharged 3.9-liter F154 V8, this restriction causes a measurable pressure drop ahead of the compressor inlets, forcing the twin IHI turbochargers to work harder to achieve target manifold absolute pressure (MAP).

Furthermore, OEM paper elements deteriorate rapidly when exposed to humidity, increasing flow resistance and robbing power over time.

The Engineering Solution

Engineered to motorsport standards, this BMC panel filter utilizes a multi-layer oiled cotton gauze element housed in low-density polyurethane molding. By swapping tight paper media for oiled cotton weave, intake air restriction is significantly minimized without compromising particulate barrier protection down to 7 microns. The continuous full-perimeter seal eliminates unfiltered bypass air and prevents deformation under high-vacuum scenarios.

The result is improved mass airflow stability, accelerated transient boost response, and reduced intake air temperatures across the entire rev range. Fully washable and regenerable, it preserves OEM factory airbox plumbing with zero modifications.

Technical Specifications

Compatibility & OEM Reference

Fits the following vehicles (BMC fitment data):

• Ferrari 488 3.9 V8 GTB (670 HP) | 2015-2019
• Ferrari 488 3.9 V8 GTB Spider (670 HP) | 2015-2019
• Ferrari 488 3.9 V8 Pista (720 HP) | 2018-2020
• Ferrari 488 3.9 V8 Pista Spider (720 HP) | 2018-2020
• Ferrari F8 3.9 V8 Tributo (720 HP) | 2019-2022
• Ferrari F8 3.9 V8 Spider (720 HP) | 2019-2022

OEM Cross Reference (BMC): FERRARI 312530, FERRARI 318481

Frequently Asked Questions & Fitment Warnings

Does this fit the F142M 488,F8?

Yes, this is a direct fit for the Ferrari 488 and F8 equipped with the F154 twin-turbocharged V8 engine. Confirm airbox shape and OEM filter size before ordering.

Do I need an ECU remap after installing this air filter?

No calibration changes are required; the factory ECU fuel trims and mass airflow parameters adjust seamlessly without triggering check engine lights.

The Ferrari Precision Standard

Engineered for exacting European tolerances, this drop-in filter integrates cleanly with factory sensors, avoiding diagnostic trouble codes while upholding Maranello-grade powertrain standards.