Performance Air Filter for BMW X5 50e, X6 & X7 40i (2022-2026)

High-Flow Drop-In Performance Air Filter for BMW X7, X6, X5 (G05/G06/G07)

What it Does: The BMC performance panel air filter replaces the restrictive factory paper element in the BMW X7, X6, and X5 airbox to maximize volumetric efficiency, reduce intake pressure drop, and sharpen throttle response.

The Stock BMW X7, X6, X5 Intake Restriction

Factory intake systems on modern B58 turbocharged inline-six platforms utilize dense, multi-pleated cellulose paper filters. While adequate for baseline particulate trapping, this OEM design generates high parasitic drag and aerodynamic resistance across the media face. As dust builds, pressure differentials between the dirty and clean sides spike significantly, choking the turbocharger inlet, slowing compressor spool, and increasing pumping losses during boost onset.

The Engineering Solution

Engineered to motorsport specifications, this BMC filter features multi-layered, low-viscosity oiled cotton gauze encased in an alloy mesh. The media allows higher laminar airflow rates without compromising filtration down to 7 microns. Molded using a proprietary "Full Moulding" process without welded joints, the durable polyurethane perimeter resists thermal degradation and deformation under high vacuum, providing an airtight seal directly within the factory airbox housing without triggering mass airflow sensor faults.

Technical Specifications

Compatibility & OEM Reference

Fits the following vehicles (BMC fitment data):

• BMW X5 (G05,F95) 50eX (313 HP) | 2023+
• BMW X6 (G06,F96) 40i Mild Hybrid (381 HP) | 2023+
• BMW X7 (G07) 40i (381 HP) | 2022+
• BMW X7 (G07) 40i Mild Hybrid (381 HP) | 2022+

OEM Cross Reference (BMC): BMW 13715A24FB2

Frequently Asked Questions & Fitment Warnings

Does this fit the G05, G06, and G07 X7, X6, X5?

Yes, this is a direct fit for the BMW X7, X6, and X5 equipped with the updated B58 engine; always confirm airbox shape and OEM filter size prior to installation.

Is an ECU tune required after installing this filter?

No, this direct drop-in panel operates smoothly within OEM DME fuel trim parameters without triggering a check engine light or requiring custom calibration.

The BMW Precision Standard

Manufactured to complement modern German engineering, this precision-molded performance panel maximizes flow velocity while maintaining strict OEM particulate filtration standards to protect sensitive mass airflow sensors and high-pressure turbocharger assemblies without triggering check engine lights.