Skip to product information
1 of 6

PCV Valve Cover Membrane Kit for BMW 6 Series (2016-2019) 3.0L



Regular price $40.95
Sale price $40.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit PCV Valve Cover Membrane Kit for 2016-2019 BMW 6 Series (G32)

What it Does: This four-piece kit replaces the worn PCV diaphragm and cap on the G32 BMW 6 Series B58 3.0L to restore sealed crankcase ventilation.

The Stock BMW 6 Series PCV Failure

On the G32 equipped with the B58 3.0L engine, the factory PCV diaphragm endures severe valve-cover heat soak and corrosive blow-by vapors. Over time, the OEM elastomer membrane hardens, cracks, or tears under manifold vacuum. Once ruptured, unmetered air enters the intake tract, causing rough idling, oil ingestion, and lean fault codes like P0171 and P0174 alongside high-pitched whistling.

Common Symptoms of a Failing OEM PCV Membrane

  • Check Engine Light / DTCs: Unmetered vacuum leaks trigger P0171, P0174, or P0507 idle faults.
  • Valve Cover Whistle: Crankcase vacuum pulling air past a torn diaphragm causes loud whistling.
  • Oil Ingestion & Misfires: Excess crankcase pressure pushes oil into the intake, causing P0300 misfires.

The Direct-Fit Elastomer PCV Solution

Rather than replacing the entire valve cover for OEM numbers 11127645173 and 11 12 1 025 447, this four-piece kit services the B58 3.0L PCV housing directly. Featuring an oil-resistant membrane, calibrated spring, cap, and washer seal, each component drops into the factory bore. Replacing these wear items restores sealed crankcase pressure, stabilizes fuel trims, and prevents intake oil contamination without cutting.

What's Included

  • 1 PCV Cap
  • 1 PCV Membrane
  • 1 Spring
  • 1 Washer Seal

Technical Specifications

Fitment 2016-2019 BMW 6 Series
Engine / Chassis B58 3.0L / G32
Stock Engine Output 335 hp / 332 lb-ft
Installation Type Direct Bolt-On OEM Replacement
Replaces OEM Part # 11127645173, 11 12 1 025 447

Compatibility

  • 2016-2019 BMW 6 Series — 3.0L Gas Turbocharged

Frequently Asked Questions & Fitment Warnings

Does this fit the G32 6 Series?

Yes. This fits the 2016-2019 BMW 6 Series with the B58 3.0L engine. Not a complete valve cover; does not fit B48 2.0L engines (2.0L 530i or 2.0L 740i).

Will this clear P0171/P0174 codes and stop valve cover whistling?

Yes. Sealing the ruptured B58 3.0L PCV diaphragm eliminates vacuum whistling and resolves unmetered air fault codes like P0171 and P0174.

How many pieces are included, and is full valve cover removal required?

Four pieces are included. The cap, membrane, spring, and washer seal install directly into the cleaned factory housing in factory order.

The BMW Precision Standard

Built to factory crankcase tolerances, this kit restores ECU fuel trim accuracy and CEL-free operation. Maintain clean intake airflow on your G32 without full valve cover replacement.




Fitment

Make

BMW

Engine Size

  • 3.0L

Year

  • 2016
  • 2017
  • 2018
  • 2019

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

PCV Valve Cover Membrane Kit for BMW 6 Series (2016-2019) 3.0L

$40.95