Skip to product information
1 of 5

O2 Oxygen Sensor Upstream Downstream for Volkswagen Golf (2010-2011) 2.5L



Regular price $50.95
Sale price $50.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2010-2011 Volkswagen Golf (Mk6)

What it Does: This upstream and downstream oxygen sensor kit monitors pre- and post-catalyst exhaust oxygen on the Mk6 2010-2011 Volkswagen Golf CBTA 2.5L engine for precise closed-loop fueling and catalyst monitoring.

The Stock Volkswagen Golf Oxygen Sensor Failure

Factory heated oxygen sensors on the Mk6 Golf equipped with the CBTA 2.5L engine endure severe thermal cycling, moisture shock, and carbon fouling. Over time, internal heater circuits burn out and zirconia sensing elements suffer response lag, delaying closed-loop fuel trim corrections. Sluggish voltage switching triggers fault codes like P0133, P0135, and P0141, forcing rich open-loop fueling that accelerates catalytic converter degradation.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers P0130, P0135, P0141, or P0420 faults from heater burnout or slow voltage oscillation.
  • Rich Fueling & Poor Economy: Delayed sensor feedback skews short-term fuel trims, fouling plugs and increasing fuel consumption.
  • Failed Emissions & Rough Idle: Prevents OBD-II readiness monitors from setting and causes uneven cold-start idling.

The Direct-Fit Zirconia Oxygen Sensor Solution

Engineered to match factory resistance and response curves, this matched pair replaces 234-5102 and 234-4754 using corrosion-resistant stainless steel housings and high-purity ceramic elements. Laser-welded protective shields resist thermal shock, while OEM-style connectors and factory harness lengths ensure clean, splice-free installation into stock exhaust bungs. Replacing both upstream and downstream sensors together restores crisp stoichiometric switching and accurate post-catalyst efficiency monitoring.

What's Included

  • 1x Upstream Oxygen Sensor
  • 1x Downstream Oxygen Sensor

Technical Specifications

Fitment 2010-2011 Volkswagen Golf
Engine / Chassis CBTA 2.5L / Mk6
Emissions & Substrate EPA Federal (CBTA) / Zirconia Ceramic
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-5102, 234-4754

Compatibility

  • 2010-2011 Volkswagen Golf 2.5L (Federal CBTA Engine)
  • SULEV CBUA 2.5L requires an additional mid-catalyst sensor (not included)

Frequently Asked Questions & Fitment Warnings

Does this fit the Mk6 Golf?

Yes. Fits 2010-2011 Volkswagen Golf models with the federal CBTA 2.5L engine. Excludes complete coverage for SULEV CBUA 2.5L engines, which require a third mid-catalyst sensor not included here.

Will this clear P0135 and P0141 codes?

Yes. Restores heater continuity and rapid switching to resolve P0133, P0135, and P0141 faults after resetting.

Is wiring splicing required for installation?

No. Direct-fit OEM connectors plug straight into factory harnesses and exhaust bungs.

The Volkswagen Precision Standard

Precise air-fuel control is essential for Euro emissions compliance and smooth five-cylinder drivability, restoring factory ECM feedback for CEL-free operation.




Fitment

Make

Volkswagen

Engine Size

  • 2.5L

Year

  • 2010
  • 2011

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Volkswagen Golf (2010-2011) 2.5L

$50.95