Skip to product information
1 of 5

O2 Oxygen Sensor Upstream Downstream for Toyota Tacoma (1999-2000) 2.4L



Regular price $43.95
Sale price $43.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 1999-2000 Toyota Tacoma (RZN140/RZN150)

What it Does: This upstream and downstream oxygen sensor kit monitors exhaust air-fuel ratios and catalyst efficiency on the 1999-2000 Toyota Tacoma RZN140/RZN150 2RZ-FE 2.4L for precise closed-loop fueling.

The Stock Toyota Tacoma Sensor Degradation

On the RZN140/RZN150 chassis with the 2RZ-FE 2.4L engine, factory zirconia elements suffer thermal fatigue from exhaust heat soak, thermal cycling, and silicon or oil-ash contamination. Over time, internal heater circuits develop high resistance while carbon soot coats the ceramic thimble, slowing voltage switching response. This sluggish feedback delays ECU fuel-trim adjustments, triggering persistent P0135 or P0141 heater faults and lean-condition P0171 codes.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light & DTCs: Triggers P0135, P0141, or P0420 from open heaters or slow switching.
  • Rough Idle & Rich Fueling: Delayed feedback forces rich open-loop operation and soot buildup.
  • Reduced MPG & Smog Failure: Inaccurate metering increases fuel burn and tailpipe emissions.

The Direct-Fit Heated Zirconia Oxygen Sensor Solution

Replacing both upstream and downstream units as a matched set restores rapid closed-loop voltage switching between 0.1V and 0.9V across the exhaust stream. Each sensor uses a corrosion-resistant stainless steel housing, laser-welded protective shield, and high-purity zirconia ceramic element built to withstand extreme thermal shock. Pre-installed OEM-style connectors matching 234-4153 and 234-4154 provide plug-and-play installation into factory bungs without wire splicing or exhaust modification.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 1999-2000 Toyota Tacoma
Engine / Chassis 2RZ-FE 2.4L / RZN140/RZN150
Sensor Architecture 4-Wire Heated Zirconia (Upstream & Downstream)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-4153, 234-4154

Compatibility

  • 1999 Toyota Tacoma 2.4L (2RZ-FE)
  • 2000 Toyota Tacoma 2.4L (2RZ-FE)

Frequently Asked Questions & Fitment Warnings

Does this fit the RZN140/RZN150 Tacoma?

Yes. Fits 1999-2000 Toyota Tacoma with the 2RZ-FE 2.4L engine. Excludes 2.7L (3RZ-FE) and 3.4L (5VZ-FE) engines; confirm displacement before ordering.

Will this clear P0135, P0141, or P0171 codes?

Yes, if caused by sensor failure. Resolves P0135 and P0141 heater faults; inspect vacuum lines if P0171 persists.

Are wiring modifications required for installation?

No. Plugs directly into factory harnesses (234-4153, 234-4154); keep anti-seize off the sensor tip during installation.

The Toyota Heavy-Duty Standard

Engineered for high-mileage Tacoma trucks, this matched kit maintains accurate fueling under towing loads and thermal stress. Restore reliable emissions compliance and fuel economy.




Fitment

Make

Toyota

Engine Size

  • 2.4L

Year

  • 1999
  • 2000

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Toyota Tacoma (1999-2000) 2.4L

$43.95