Skip to product information
1 of 5

O2 Oxygen Sensor Upstream Downstream for Toyota Sienna (2012-2015) 3.5L



Regular price $146.95
Sale price $146.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2012-2015 Toyota Sienna (XL30)

What it Does: This matched 4-piece oxygen sensor kit for the 2012-2015 Toyota Sienna (XL30) 2GR-FE 3.5L V6 regulates closed-loop fuel trim and monitors catalytic converter efficiency.

The Stock Toyota Sienna Oxygen Sensor Failure

On the XL30 Sienna with the 2GR-FE 3.5L V6, factory upstream and downstream oxygen sensors endure severe thermal cycling and exhaust contamination. Over time, internal zirconia elements develop sluggish response rates while heater circuits suffer resistance spikes or burnout. Carbon fouling also skews voltage feedback to the ECM, triggering fault codes like P0135, P0155, and P0420.

Common Symptoms of Failing OEM Oxygen Sensors

  • Check Engine Light / DTCs: Triggers P0135, P0155, or P0420 when heater circuits or switching rates fail.
  • Fuel Trim Imbalance: Erratic upstream signals cause P0171/P0174 lean codes and rough idle.
  • Poor MPG & Emissions Failure: Sluggish O2 feedback forces rich open-loop fueling, failing readiness monitors.

The Direct-Fit Oxygen Sensor Solution

Replacing all four sensors as a matched set restores balanced Bank 1 and Bank 2 feedback across your 2GR-FE 3.5L V6. Each sensor features a stainless steel housing, laser-welded protective shield, and fast-acting planar zirconia element calibrated to factory voltage curves. Pre-terminated with OE 4-wire plugs replacing 89467-04080, 89467-06120, and 89465-08060, bolt-in installation requires zero wire splicing.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2012-2015 Toyota Sienna
Engine / Chassis 2GR-FE 3.5L V6 / XL30 (GSL30)
Sensor Architecture Heated 4-Wire Planar Zirconia
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-4416, 234-9114, 234-9128, 89467-04080, 89467-06120, 89467-06130, 89467-06140, 89467-06160, 89467-0E170, 89467-33220, 89467-33230, 89467-48190, 89465-08060, 89465-0E040, 89465-48220

Compatibility

  • 2012-2015 Toyota Sienna 3.5L (FWD Models Only)

Frequently Asked Questions & Fitment Warnings

Does this fit the XL30 Sienna?

Yes. Fits 2012-2015 FWD Toyota Sienna (GSL30) with the 2GR-FE 3.5L V6. Excludes AWD models and 4-cylinder trims.

Will this clear P0135, P0155, and P0171 codes?

Yes. New sensors restore heater resistance and fast fuel trim feedback to clear P0135, P0155, and P0171/P0174 codes.

Are OE connectors pre-installed for installation?

Yes. All four sensors include factory-keyed plugs matching 234-9114, 234-9128, and 234-4416 with zero splicing needed.

The Toyota Precision Standard

Built for accurate ECM voltage calibration on your XL30 Sienna, this matched sensor kit restores closed-loop fueling and CEL-free drivability. Maintain reliable highway economy and OBD-II emissions readiness.




Fitment

Make

Toyota

Engine Size

  • 3.5L

Year

  • 2012
  • 2013
  • 2014
  • 2015

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Toyota Sienna (2012-2015) 3.5L

$146.95