Skip to product information
1 of 4

O2 Oxygen Sensor Upstream Downstream for Toyota Corolla (2014-2016) 1.8L



Regular price $52.95
Sale price $52.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2014-2016 Toyota Corolla (E170)

What it Does: This dual oxygen (O2) sensor kit monitors pre- and post-catalytic converter exhaust oxygen levels on the 2014-2016 Toyota Corolla (E170) 2ZR-FE 1.8L so the ECM can regulate fuel trim and catalyst efficiency.

The Stock Toyota Corolla Sensor Failure

Over high mileage, factory O2 sensors on the E170 chassis equipped with the 2ZR-FE 1.8L engine suffer from thermal shock, carbon fouling, and internal heater coil burnout. A sluggish upstream sensor disrupts closed-loop fuel control, triggering codes like P0130 or P0135. Meanwhile, a degraded downstream sensor triggers P0136, P0141, or false P0420 catalyst faults, and replacing only one unit leaves a worn partner skewing readings.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Stored heater or response faults like P0135, P0141, P0171, or P0420 from biased voltage output.
  • Rough Idle & Hesitation: Delayed closed-loop feedback causes erratic fuel trim swings and flat spots under throttle.
  • Higher Fuel Consumption & Failed Emissions: Rich-biased signals over-fuel the 2ZR-FE 1.8L and prevent OBD-II monitors from setting.

The Direct-Fit Dual Oxygen Sensor Solution

This two-piece kit restores matched pre-cat and post-cat signal response for OEM reference numbers 234-9021, 234-4260, 24594, and SG368. Each unit features a fast-acting zirconia sensing element, integrated heater circuit, and stainless housing engineered to resist exhaust heat soak. Factory-keyed connectors provide direct plug-and-play installation without splicing. Hand-thread each body—keeping anti-seize off the sensing tip—before torquing to spec.

What's Included

  • 1x Direct-Fit Upstream (Pre-Cat) Oxygen Sensor
  • 1x Direct-Fit Downstream (Post-Cat) Oxygen Sensor

Technical Specifications

Fitment 2014-2016 Toyota Corolla
Engine / Chassis 2ZR-FE 1.8L / E170
Emissions & Substrate OBD-II Compliant / Planar Zirconia Element
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-9021, 234-4260, 24594, SG368

Compatibility

  • 2014-2016 Toyota Corolla 1.8L (E170 / 2ZR-FE)

Frequently Asked Questions & Fitment Warnings

Does this fit the E170 Corolla?

Yes. This is a direct fit for the 2014-2016 Toyota Corolla equipped with the 2ZR-FE 1.8L engine. Confirm model year, 1.8L displacement, and connector style before ordering; other engines and years are excluded.

Will this clear P0135, P0141, or P0420 codes, and are both sensors included?

Yes. Both upstream and downstream sensors are included to resolve sensor-driven heater and response faults like P0135, P0141, and false P0420 codes. Clear stored DTCs after installation and complete a drive cycle to reset monitors.

Is wire splicing or anti-seize required for installation?

No splicing is required. Factory-style connectors plug directly into the OEM harness; keep grease and anti-seize off the sensing tip and hand-thread before torquing.

The Toyota Precision Standard

Engineered for strict stoichiometric accuracy on the E170 platform, this matched sensor pair keeps closed-loop fuel trims consistent and readiness monitors clear. Restore reliable drivability and factory fuel economy without splicing.




Fitment

Make

Toyota

Engine Size

  • 1.8L

Year

  • 2014
  • 2015
  • 2016

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Toyota Corolla (2014-2016) 1.8L

$52.95