Skip to product information
1 of 4

O2 Oxygen Sensor Upstream Downstream for Toyota Corolla (2007-2008) 1.8L



Regular price $65.95
Sale price $65.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2007-2008 Toyota Corolla (E130)

What it Does: This direct-fit upstream and downstream oxygen sensor kit monitors pre- and post-catalytic exhaust oxygen content on the 2007-2008 E130 Toyota Corolla 1ZZ-FE 1.8L to regulate air-fuel ratio and catalyst efficiency.

The Stock Toyota Corolla Sensor Degradation & Heater Circuit Failure

Over repeated thermal cycles, factory oxygen sensors on the E130 Corolla equipped with the 1ZZ-FE 1.8L suffer ceramic element contamination and internal heater circuit burnout. Carbon fouling and exhaust moisture degrade the sensing tip, slowing voltage response across the upstream air-fuel ratio and downstream monitor circuits. This triggers fault codes like P0135, P0141, and P0171 while forcing the ECU into inefficient open-loop fueling.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers heater circuit or slow-response fault codes including P0135, P0141, P0133, or lean fuel trim code P0171.
  • Erratic Closed-Loop Fueling: Delayed voltage switching causes rough idle, throttle hesitation, and rich exhaust odor from over-fueling.
  • Failed Emissions & Poor MPG: Degraded downstream monitoring can falsely flag catalyst efficiency code P0420 and reduce fuel economy.

The Direct-Fit Heated Zirconia Oxygen Sensor Solution

This matched upstream and downstream sensor kit restores closed-loop lambda feedback using precision-sintered zirconia ceramic elements and laser-welded stainless steel housings. Internal heaters reach operating temperature rapidly to minimize cold-start emissions and sustain stable millivolt switching under exhaust heat. Each sensor includes heat-resistant wiring, protective sheathing, and OEM-style weatherproof connectors with M18 x 1.5 threads for true bolt-in, direct-fit installation without cutting or splicing.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2007-2008 Toyota Corolla
Engine / Chassis 1ZZ-FE 1.8L / E130
Sensor Architecture Heated Zirconia Ceramic / Direct-Fit Upstream & Downstream
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)

Compatibility

  • 2007-2008 Toyota Corolla 1.8L (Upstream & Downstream Positions)

Frequently Asked Questions & Fitment Warnings

Does this fit the E130 Corolla?

Yes. This is a direct fit for the 2007-2008 Toyota Corolla equipped with the 1ZZ-FE 1.8L engine. Always confirm your vehicle is equipped with the 1.8L engine before ordering.

Will replacing both sensors clear P0135, P0141, or P0420 codes?

Yes, if caused by sensor failure. Replacing the matched set resolves heater circuit (P0135/P0141) and slow-response codes; clear stored DTCs and inspect catalytic converter substrate health if P0420 persists.

Are connectors pre-wired, and is cutting or splicing required?

No splicing is required. Both sensors include direct-fit OEM-style connectors; torque threads to factory specification and keep anti-seize away from the sensing tip.

The Toyota Precision Standard

Accurate exhaust gas feedback is critical for maintaining factory emissions compliance and crisp throttle response on the 1ZZ-FE 1.8L platform. Replacing both sensors as a matched set restores reliable closed-loop fuel control and CEL-free daily drivability.




Fitment

Make

Toyota

Engine Size

  • 1.8L

Year

  • 2007
  • 2008

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Toyota Corolla (2007-2008) 1.8L

$65.95