O2 Oxygen Sensor Upstream Downstream for Subaru Legacy Outback (2013-2014) 2.5L
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2013-2014 Subaru Legacy & Outback (BM/BR)
What it Does: This matched upstream and downstream oxygen sensor kit monitors pre- and post-catalytic converter exhaust gas oxygen levels on the 2013-2014 Subaru Legacy and Outback BM/BR equipped with the FB25 2.5L H4 engine to regulate closed-loop fuel trim and verify catalyst efficiency.
The Stock Subaru Legacy & Outback Oxygen Sensor Failure
On the BM/BR chassis powered by the FB25 2.5L H4 Boxer engine, factory oxygen sensors endure severe thermal cycling, exhaust soot, and oil vapor contamination inside the lower manifold and mid-pipe assembly. Over time, internal zirconia sensing elements suffer thermal shock and silicon poisoning, while internal heater circuits degrade and open. This slows sensor voltage switching frequency and triggers P0133, P0031, or P0137 faults, forcing the ECM into open-loop fuel enrichment.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light & Sensor DTCs: Triggers fault codes such as P0133 (slow upstream response), P0031 (heater circuit low), P0137 (downstream low voltage), or false P0420 catalyst efficiency alerts.
- Rich Fuel Trim & Carbon Fouling: Sluggish upstream signal voltage causes the ECM to over-fuel, leading to blackened tailpipes, rough idle, and premature catalytic substrate saturation.
- Degraded Fuel Economy & Emissions Failure: Open-loop operation increases fuel consumption, induces hesitation under light throttle load, and causes automatic OBD-II emissions inspection failure.
The Direct-Fit Heated Zirconia Oxygen Sensor Solution
Replacing both sensors as a matched pair restores synchronized air-fuel ratio feedback and accurate post-catalyst monitoring for OEM reference 234-9136. Each sensor utilizes a fast-light-off internal heater element and a laser-welded stainless steel protective shield housing a high-purity zirconia ceramic core that resists thermal shock and moisture intrusion. Factory-length heat-sleeved leads and OEM-style weatherproof connectors plug directly into the FB25 engine harness without cutting, splicing, or modifying exhaust bungs.
What's Included
- 1x Upstream Oxygen (O2) Sensor
- 1x Downstream Oxygen (O2) Sensor
Technical Specifications
| Fitment | 2013-2014 Subaru Legacy & Outback |
|---|---|
| Engine / Chassis | FB25 2.5L H4 / BM/BR |
| Emissions & Substrate | EPA Federal & CARB Compatible / Heated Zirconia Ceramic |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 234-9136 |
Compatibility
- 2013-2014 Subaru Legacy 2.5L (BM Sedan)
- 2013-2014 Subaru Outback 2.5L (BR Wagon)
Frequently Asked Questions & Fitment Warnings
Does this fit the BM/BR Legacy & Outback?
Yes. This is a direct fit for the 2013-2014 Subaru Legacy and Outback equipped with the FB25 2.5L H4 engine. It does not fit 3.6L H6 (EZ36D) models or 2010-2012 2.5L (EJ253) applications.
Will replacing both sensors clear P0133, P0031, or P0420 codes?
Yes, when caused by degraded sensors. Installing fresh upstream and downstream units resolves P0133, P0031, and P0137 faults and eliminates false P0420 triggers caused by slow rear O2 switching, provided the catalytic substrate remains intact.
Are factory connectors included and what installation prep is required?
Yes, direct-fit OEM connectors are pre-installed. Apply a light coat of high-temp anti-seize strictly to the threads while keeping the sensing tip clean, torque to 22-30 ft-lbs, and reset ECM learned fuel trims after installation.
The Subaru Precision Standard
Engineered to maintain tight closed-loop air-fuel stoichiometry and CEL-free operation on daily-driven BM/BR boxers, this matched O2 sensor kit restores crisp throttle response and dependable emissions compliance. Always verify your 2.5L engine designation prior to ordering for exact connector indexing.
Fitment
Fitment
|
Make |
Subaru |
|---|---|
|
Engine Size |
|
|
Year |
|
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$44.95