Skip to product information
1 of 2

O2 Oxygen Sensor Upstream Downstream for Subaru Impreza (2012-2014) 2.0L



Regular price $195.95
Sale price $195.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit O2 Sensor Kit for 2012-2014 Subaru Impreza (GJ/GP)

What it Does: This 2-piece upstream and downstream oxygen sensor kit restores closed-loop fuel trim control and catalyst monitoring on the 2012-2014 Subaru Impreza (GJ/GP) FB20 2.0L.

The Stock Subaru Impreza O2 Sensor Failure

Factory oxygen sensors on the GJ/GP chassis with the FB20 2.0L endure extreme exhaust thermal cycling, moisture condensation, and carbon soot fouling. Over time, the zirconia sensing element loses switching speed while internal heaters develop high resistance or open circuits. Biased pre-cat readings skew fuel trims, while slow post-cat signals trigger stored P0420 catalyst efficiency or P0031/P0037 heater circuit fault codes.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / DTCs: Stored P0131, P0137, P0031, or P0420 codes from heater failure or sluggish voltage switching.
  • Drivability Issues: Rough idle, throttle hesitation, and elevated fuel consumption caused by biased air-fuel metering.
  • Failed Emissions: Incomplete readiness monitors when the ECM locks out closed-loop operation.

The Direct-Fit O2 Sensor Solution

Replacing both sensors together prevents cross-sensor bias between pre-cat fueling and post-cat monitoring on the FB20 2.0L. Each direct-fit unit uses OE-calibrated zirconia sensing elements, laser-welded stainless housings, and factory connectors matching OEM numbers 234-9109 and 234-4513. Thread each body in by hand without splicing wires, keep anti-seize off the sensing tip, torque to spec, and complete a drive cycle.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2012-2014 Subaru Impreza
Engine / Chassis FB20 2.0L / GJ/GP
Emissions & Sensor Spec Upstream A/F & Downstream Heated O2
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-9109, 234-4513, 2349109, 2344513

Compatibility

  • 2012-2014 Subaru Impreza 2.0L (FB20)

Frequently Asked Questions & Fitment Warnings

Does this fit the GJ/GP Impreza?

Yes. Direct fit for 2012-2014 Subaru Impreza FB20 2.0L models. Excludes 2.5L WRX/STI trims; verify engine and connector before ordering.

Will this clear P0420 or heater codes?

Yes, if sensor-related. Matched 234-9109 and 234-4513 sensors resolve P0031, P0131, and sensor-induced P0420 after clearing codes and driving.

Is wire splicing or anti-seize required?

No splicing required. Plugs directly into factory harnesses; keep anti-seize off the tip and torque properly.

The Subaru Precision Standard

Restoring matched upstream and downstream feedback delivers crisp throttle response and accurate stoichiometric fueling on your FB20 boxer. Consistent sensor switching keeps your Impreza CEL-free and emissions-ready.




Fitment

Make

Subaru

Engine Size

  • 2.0L

Year

  • 2012
  • 2013
  • 2014

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Subaru Impreza (2012-2014) 2.0L

$195.95