O2 Oxygen Sensor Upstream Downstream for Nissan Frontier (2011-2012) 4.0L
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
Direct-Fit Upstream & Downstream O2 Sensor Kit for 2011-2012 Nissan Frontier (D40)
What it Does: This 4-piece upstream and downstream oxygen sensor kit measures pre- and post-catalytic exhaust oxygen content on the 2011-2012 D40 Nissan Frontier VQ40DE 4.0L V6 to maintain stoichiometric fuel trim and monitor catalyst efficiency.
The Stock Nissan Frontier Oxygen Sensor Failure
On the D40 Frontier powered by the VQ40DE 4.0L V6, factory oxygen sensors endure severe exhaust heat soak, thermal cycling, and carbon contamination over time. As the internal zirconia sensing element ages or the internal heater circuit degrades, response time slows and output voltage drifts out of range. When bank-to-bank air-fuel feedback skews, the ECM loses accurate closed-loop control, triggering slow-response or circuit codes such as P0133, P0153, P0138, or false P0420/P0430 faults.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / DTCs: Stored heater or biased-signal fault codes like P0130, P0135, P0155, or P0420/P0430.
- Rough Idle & Hesitation: Sluggish upstream sensor switching causes erratic short-term fuel trims and uneven bank-to-bank throttle response.
- Higher Fuel Consumption & Failed Emissions: Defaulting to rich fueling lowers MPG and prevents downstream readiness monitors from completing.
The Direct-Fit 4-Piece Oxygen Sensor Solution
Replacing all four sensors simultaneously with kit AUT8362500US restores balanced bank-to-bank air-fuel feedback across both exhaust banks of the VQ40DE. Each direct-fit sensor features application-specific OE-style connectors and pre-terminated leads for plug-and-play installation without splicing generic harnesses. Corrosion-resistant housings withstand high exhaust temperatures while delivering accurate switching signals to the engine computer. Thread each sensor by hand—keeping grease and anti-seize off the sensing element—before torquing to specification.
What's Included
- 2x Upstream (Pre-Catalytic Converter) Direct-Fit Oxygen Sensors
- 2x Downstream (Post-Catalytic Converter) Direct-Fit Oxygen Sensors
Technical Specifications
| Fitment | 2011-2012 Nissan Frontier |
|---|---|
| Engine / Chassis | VQ40DE 4.0L V6 / D40 |
| Emissions & Sensor Spec | 4-Piece Direct-Fit (2 Upstream / 2 Downstream) |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Splicing) |
Compatibility
- 2011-2012 Nissan Frontier 4.0L (Confirm engine displacement, model year, and connector style prior to ordering)
Frequently Asked Questions & Fitment Warnings
Does this fit the D40 Frontier?
Yes. This is a direct fit for the 2011-2012 Nissan Frontier equipped with the VQ40DE 4.0L V6 engine. Not compatible with 2.5L 4-cylinder models or other model years; verify connector style before ordering.
Will replacing all four sensors clear O2 and P0420/P0430 codes?
Yes, when faulty sensors are the root cause. Installing a matched pre- and post-cat set prevents an aging partner sensor from skewing fuel trim or triggering false P0420/P0430 codes. Clear stored codes and complete a drive cycle so monitors reset.
Is wire splicing or anti-seize required for installation?
No splicing is required. Each direct-fit sensor uses the factory-style plug, though you must keep grease and anti-seize off the sensing tip, start threads by hand, and torque to factory spec.
The Nissan Heavy-Duty Standard
Engineered for the sustained exhaust heat of towing, hauling, and daily driving on the D40 platform, this matched 4-sensor kit restores factory fuel-trim precision to your VQ40DE. Keep your emissions readiness monitors compliant and your check-engine light off mile after mile.
Fitment
Fitment
|
Make |
Nissan |
|---|---|
|
Engine Size |
|
|
Year |
|
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$83.95