O2 Oxygen Sensor Upstream Downstream for Mitsubishi Lancer (2008-2011) 2.0L
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2008-2011 Mitsubishi Lancer (CY4A)
What it Does: This matched upstream and downstream O2 sensor kit for the 2008-2011 Mitsubishi Lancer CY4A (4B11 2.0L) regulates closed-loop fuel trim and monitors catalytic converter efficiency.
The Stock Mitsubishi Lancer Oxygen Sensor Failure
Factory oxygen sensors on the CY4A Lancer endure severe thermal cycling and carbon fouling from the 4B11 2.0L exhaust stream. Over time, internal heater circuits burn out or the zirconia element becomes poisoned and sluggish, delaying closed-loop voltage switching. When pre-cat or post-cat sensors drift, the ECM triggers P0135, P0141, or P0420 codes. Replacing only one unit leaves an aged partner sensor skewing long-term fuel trim.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / DTCs: Stored codes like P0135, P0141, P0171, or P0420 from erratic millivolt switching.
- Rough Idle & Hesitation: Delayed stoichiometric correction causes stumble under throttle load.
- Failed Emissions & High Consumption: Incomplete readiness monitors and rich fueling fail inspections.
The Direct-Fit Dual-Sensor Oxygen Sensor Solution
This two-piece kit replaces both pre-cat and post-cat positions simultaneously to restore synchronized air-fuel telemetry on the 4B11 2.0L. Each sensor uses a fast-acting planar zirconia element, stainless steel housing, and OEM-spec heater circuit for rapid cold-start light-off. Factory-terminated connectors match 234-4116 and 234-4114, eliminating wire splicing or impedance mismatch. Paired installation stabilizes fuel trim and enables complete catalytic monitor readiness.
What's Included
- 1x Upstream (Pre-Catalytic Converter) Oxygen Sensor
- 1x Downstream (Post-Catalytic Converter) Oxygen Sensor
Technical Specifications
| Fitment | 2008-2011 Mitsubishi Lancer |
|---|---|
| Engine / Chassis | 4B11 2.0L I4 / CY4A |
| Emissions & Sensing | OBD-II Direct-Fit / Heated Zirconia Ceramic |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 234-4116, 234-4114 |
Compatibility
- 2008-2011 Mitsubishi Lancer 2.0L (confirm displacement, model year, and connector style before ordering)
Frequently Asked Questions & Fitment Warnings
Does this fit the CY4A Lancer?
Yes. Fits 2008-2011 Mitsubishi Lancer models equipped with the 4B11 2.0L engine. Excludes 2.4L models and unlisted engines; verify connector style prior to ordering.
Will this clear P0135 or P0420 codes without splicing?
Yes, if sensor-induced, with zero splicing. Plugs directly into factory harnesses matching 234-4116 and 234-4114; clear stored codes and complete a drive cycle.
Any installation prep required for the sensor threads?
Yes, hand-thread first and avoid tip contamination. Keep grease and anti-seize completely off the sensing element before torquing the body to spec.
The Mitsubishi Precision Standard
Engineered for JDM responsiveness, this paired sensor kit restores crisp throttle response and accurate air-fuel metering across the rev range, keeping your CY4A Lancer running clean and CEL-free.
Fitment
Fitment
|
Make |
Mitsubishi |
|---|---|
|
Engine Size |
|
|
Year |
|
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$53.95