Skip to product information
1 of 5

O2 Oxygen Sensor Upstream Downstream for Hyundai Tucson (2017-2018) 2.0L



Regular price $58.95
Sale price $58.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2017-2018 Hyundai Tucson (TL)

What it Does: This matched upstream and downstream oxygen sensor kit monitors exhaust oxygen levels on the 2017-2018 Hyundai Tucson (TL) G4NC 2.0L to regulate closed-loop fuel trim and catalyst efficiency.

The Stock Hyundai Tucson Oxygen Sensor Failure

Factory oxygen sensors on the TL chassis equipped with the G4NC 2.0L engine endure constant thermal cycling, carbon soot buildup, and moisture shock inside the exhaust stream. Over time, the zirconia sensing element suffers internal contamination or heater circuit burnout, slowing voltage switching response and skewing ECM fuel-trim calculations. Degraded sensor feedback triggers P0133, P0136, or P0171 fault codes and forces rich open-loop fueling.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers P0130, P0133, P0140, or P0420 from slow response, heater burnout, or flatlined post-cat voltage.
  • Erratic Fuel Trim & Rough Idle: Biased upstream air-fuel readings cause lean or rich misfires and sluggish throttle response.
  • Poor Fuel Economy & Failed Emissions: Default open-loop enrichment wastes fuel and prevents OBD-II readiness monitors from setting.

The Direct-Fit Zirconia Oxygen Sensor Solution

Replacing both positions as a matched set restores balanced Bank 1 Sensor 1 closed-loop fuel metering and Bank 1 Sensor 2 catalyst monitoring, cross-referenced to OEM part 059906262L. Each direct-fit sensor features a corrosion-resistant stainless steel housing, high-temp ceramic sensing element, and factory-matched wiring harness with OEM-style plug-and-play connectors. Correct thread pitch and harness routing eliminate splicing and restore rapid heater warm-up times.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2017-2018 Hyundai Tucson
Engine / Chassis G4NC 2.0L / TL
Stock Engine Output 164 hp / 151 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 059906262L

Compatibility

  • 2017-2018 Hyundai Tucson 2.0L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the TL Tucson?

Yes. This is a direct fit for the 2017-2018 Hyundai Tucson equipped with the G4NC 2.0L engine. Excludes 1.6L Turbo and 2.4L engines; confirm your 2.0L engine before ordering.

Will this clear P0133 or P0140 codes and restore fuel economy?

Yes. Replacing both sensors resolves P0133 slow-response and P0140 no-activity faults after clearing ECM memory, restoring stoichiometric closed-loop fueling.

Is wire splicing required during installation?

No. Both direct-fit sensors include OEM-style connectors, allowing clean removal and installation with a standard 22mm O2 sensor socket.

The Hyundai Precision Standard

Built to meet OEM ECM signal tolerances, this matched sensor kit restores crisp closed-loop fueling and CEL-free emissions compliance on your TL Tucson. Reliable voltage feedback ensures consistent drivability and clean OBD-II readiness.




Fitment

Make

Hyundai

Engine Size

  • 2.0L

Year

  • 2017
  • 2018

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Hyundai Tucson (2017-2018) 2.0L

$58.95