Skip to product information
1 of 5

O2 Oxygen Sensor Upstream Downstream for Hyundai Tucson (2016-2018) 1.6L



Regular price $63.95
Sale price $63.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit O2 Oxygen Sensor Upstream Downstream Kit for 2016-2018 Hyundai Tucson (TL)

What it Does: This upstream and downstream O2 sensor kit monitors pre- and post-catalyst air-fuel ratios on the 2016-2018 Hyundai Tucson (TL) G4FJ 1.6L T-GDI to maintain fuel trim and emissions compliance.

The Stock Hyundai Tucson Sensor Failure

On the TL chassis equipped with the G4FJ 1.6L T-GDI engine, OEM oxygen sensors endure severe exhaust heat and direct-injection soot buildup. Thermal cycling fractures the internal zirconia element and burns out the heater coil, triggering P0135 or P0141 circuit codes. Carbon fouling also slows lambda switching speed, causing P0133 slow-response faults, skewed fuel trims, and false P0420 catalyst efficiency warnings during highway operation.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / DTCs: Triggers P0130, P0133, P0135, P0141, or P0420 from degraded sensor output or heater burnout.
  • Delayed Closed-Loop Control: Prolonged rich cold starts when the internal heating element fails.
  • Drivability & Emissions Loss: Boost hesitation, rough idle, poor mileage, and failed emissions tests.

The Direct-Fit Heated O2 Sensor Solution

Replacing both sensors as a matched set restores accurate pre-catalyst air-fuel metering and post-catalyst monitoring on the G4FJ 1.6L T-GDI exhaust system. Each direct-fit unit uses a corrosion-resistant stainless steel housing, rapid-response zirconia ceramic element, and integrated resistive heater coil. Factory-length shielded leads and OE-style locking connectors eliminate wiring splicing, ensuring clean ECM voltage feedback and bolt-on installation into stock TL exhaust bungs.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2016-2018 Hyundai Tucson
Engine / Chassis G4FJ 1.6L T-GDI / TL
Emissions & Sensor Spec Direct-Fit Upstream & Downstream Heated O2
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)

Compatibility

  • 2016-2018 Hyundai Tucson 1.6L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the TL Tucson?

Yes. Fits 2016-2018 Hyundai Tucson (G4FJ 1.6L T-GDI). Excludes 2.0L and 2.4L engines; confirm before ordering.

Will this clear P0133, P0135, or P0141 codes?

Yes, if sensor failure triggered the fault. A matched set resolves P0133 slow-response and P0135/P0141 heater codes once wiring is verified.

Is wiring splicing required for installation?

No. OE-style connectors install plug-and-play into stock TL bungs without cutting or splicing.

The Hyundai Precision Standard

Engineered for accurate ECM fuel-trim feedback, this TL kit keeps your G4FJ 1.6L T-GDI CEL-free. Built for turbocharged exhaust heat, it restores emissions compliance and drivability.




Fitment

Make

Hyundai

Engine Size

  • 1.6L

Year

  • 2016
  • 2017
  • 2018

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Hyundai Tucson (2016-2018) 1.6L

$63.95