Skip to product information
1 of 3

O2 Oxygen Sensor Upstream Downstream for GMC Terrain (2013-2017) 3.6L



Regular price $82.95
Sale price $82.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2013-2017 GMC Terrain (GMT177)

What it Does: This 4-piece direct-fit oxygen sensor kit measures pre- and post-cat exhaust oxygen on the 2013-2017 GMC Terrain (GMT177) LFX 3.6L V6 so the ECM can regulate fuel trim and verify catalyst efficiency.

The Stock GMC Terrain Oxygen Sensor Failure

On the GMT177 chassis with the LFX 3.6L V6, factory oxygen sensors endure extreme exhaust heat and continuous thermal cycling. Over time, soot fouling, silicone contamination, and ceramic element fractures slow switching speed or burn out the internal heater circuit, triggering codes like P0135, P0141, or P0171. Because upstream sensors control air-fuel trim while downstream units monitor catalyst storage, leaving one worn partner sensor skews bank-to-bank readings and triggers false P0420/P0430 alerts.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Stored codes such as P0135, P0141 (heater circuit), P0171 (fuel bias), or P0420/P0430.
  • Rough Idle & Hesitation: Slow or biased voltage response causes erratic closed-loop fuel corrections.
  • High Fuel Use & Failed Emissions: Defaulting to rich fueling drops MPG and blocks readiness monitors.

The Direct-Fit Heated Zirconia Oxygen Sensor Solution

Engineered as a matched four-sensor set replacing 234-4815, this kit restores uniform switching response across both exhaust banks on your LFX 3.6L V6. Each direct-fit unit pairs a zirconia sensing element with an internal heater and durable housing to withstand thermal shock. Factory-style connectors allow true plug-and-play installation without cutting or splicing vehicle leads, maintaining accurate closed-loop stoichiometry and clean readiness monitor completion.

What's Included

  • 2x Upstream (Pre-Catalytic Converter) Oxygen Sensors
  • 2x Downstream (Post-Catalytic Converter) Oxygen Sensors

Technical Specifications

Fitment 2013-2017 GMC Terrain
Engine / Chassis LFX 3.6L V6 / GMT177
Sensor Architecture Heated Zirconia / Pre- & Post-Cat 4-Piece Kit
Installation Type Direct-Fit OEM Replacement (No Cutting or Splicing)
Replaces OEM Part # 234-4815

Compatibility

  • 2013-2017 GMC Terrain (3.6L V6 Engine Only)

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT177 Terrain?

Yes. This is a direct fit for the 2013-2017 GMC Terrain equipped with the LFX 3.6L V6 engine. Excludes 2.4L 4-cylinder trims and other model years; confirm engine displacement and connector style before ordering.

Will this clear P0420/P0430 or heater circuit codes?

Yes, when sensors are at fault. Replacing all four resolves heater codes like P0135/P0141 and response lag; clear stored DTCs and complete a drive cycle afterward.

Is wire splicing or special prep needed during installation?

No splicing is needed. All four sensors include OEM connectors; keep anti-seize off the sensing tip, thread by hand, and torque to spec.

The GMC Precision Standard

Maintaining accurate bank-to-bank air-fuel parity on the LFX 3.6L V6 protects your catalytic converters and keeps the GMT177 emissions-compliant. Replacing all four sensors together eliminates cross-bank signal lag for reliable, CEL-free operation.




Fitment

Make

GMC

Engine Size

  • 3.6L

Year

  • 2013
  • 2014
  • 2015
  • 2016
  • 2017

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for GMC Terrain (2013-2017) 3.6L

$82.95