Skip to product information
1 of 2

O2 Oxygen Sensor Upstream Downstream for Ford Transit Connect (2016-2018) 2.5L



Regular price $79.95
Sale price $79.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2016-2018 Ford Transit Connect (V408)

What it Does: This matched upstream and downstream oxygen sensor kit monitors exhaust oxygen levels on the 2016-2018 Ford Transit Connect (V408) 2.5L Duratec to maintain closed-loop air-fuel precision and verify catalyst efficiency.

The Stock Ford Transit Connect Sensor Failure

Over high-mileage commercial duty cycles, factory oxygen sensors on the V408 equipped with the 2.5L Duratec iVCT engine suffer from ceramic zirconia contamination and internal heater degradation. Repeated thermal cycling, soot buildup, and moisture intrusion cause sluggish millivolt switching or open heater circuits. Once upstream feedback lags, the PCM loses fuel trim accuracy, triggering P0130, P0135, P0141, or lean codes like P0171.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers heater and slow-response codes including P0130, P0135, P0136, P0141, or false P0420 faults.
  • Erratic Fuel Trims: Delayed voltage switching forces open-loop enrichment, causing black exhaust soot and poor MPG.
  • Drivability & Emissions Failure: Rough idle, throttle hesitation under load, and incomplete OBD-II readiness monitors.

The Direct-Fit Heated Oxygen Sensor Solution

This matched upstream and downstream pair restores factory closed-loop fuel metering and post-catalyst monitoring without universal wire splicing. Each sensor features a laser-welded stainless housing, thermal-shock-resistant ceramic sensing element, and integrated heating coil for rapid cold-start light-off. Factory-length insulated leads and OEM weatherproof plugs connect directly to the V408 harness, while replacing both positions together eliminates diagnostic guesswork across the 2.5L Duratec iVCT exhaust system.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2016-2018 Ford Transit Connect
Engine / Chassis 2.5L Duratec iVCT / V408
Emissions & Sensor Spec Heated Zirconia Element (Upstream & Downstream Set)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)

Compatibility

  • 2016 Ford Transit Connect (2.5L)
  • 2017 Ford Transit Connect (2.5L)
  • 2018 Ford Transit Connect (2.5L)

Frequently Asked Questions & Fitment Warnings

Does this fit the V408 Transit Connect?

Yes. This is a direct fit for the 2016-2018 Ford Transit Connect equipped with the 2.5L Duratec iVCT engine. Not compatible with 1.6L EcoBoost models; confirm your 2.5L engine before ordering.

Will this clear P0135, P0141, or P0420 codes?

Yes, when caused by degraded sensors. Replacing both units resolves heater and response codes like P0130, P0135, and P0141, while a persistent P0420 indicates a worn catalytic converter.

Is wire splicing or special hardware required for installation?

No. Both sensors include factory-terminated OEM plugs for plug-and-play installation using an O2 sensor socket.

The Ford Precision Standard

Built for commercial fleet reliability and strict emissions compliance, this matched sensor set keeps your 2.5L Duratec running at stoichiometric efficiency with CEL-free ECU operation.




Fitment

Make

Ford

Engine Size

  • 2.5L

Year

  • 2016
  • 2017
  • 2018

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Ford Transit Connect (2016-2018) 2.5L

$79.95