Skip to product information
1 of 5

O2 Oxygen Sensor Upstream Downstream for Ford Transit Connect (2010-2013) 2.0L



Regular price $44.95
Sale price $44.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit O2 Oxygen Sensor Kit for 2010-2013 Ford Transit Connect (V227)

What it Does: This upstream and downstream O2 sensor kit monitors exhaust oxygen on the V227 Ford Transit Connect 2.0L Duratec DOHC I4 to regulate fuel trim and catalyst efficiency.

The Stock Ford Transit Connect Sensor Failure

Factory zirconia oxygen sensors on the V227 equipped with the 2.0L Duratec DOHC I4 suffer from thermal cycling fatigue, carbon fouling, and internal heater burnout over high-mileage delivery service. As platinum electrodes degrade from exhaust contaminants, voltage switching slows and skews closed-loop fuel trims. Open heater circuits also trigger P0135 or P0141 codes, forcing rich open-loop fueling and risking premature catalytic converter damage.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / DTCs: Codes like P0130, P0135, P0141, or P0420 from sluggish switching or heater circuit failure.
  • Fuel Trim & Idle Drift: Rich exhaust odor, soot-blackened tailpipes, and erratic short-term fuel trims.
  • Drivability & Emissions Loss: Rough idle, dropped fuel economy, and failed OBD-II emissions tests.

The Direct-Fit Zirconia Sensor Solution

This matched upstream and downstream sensor kit restores factory closed-loop lambda feedback using fast-acting zirconia ceramic elements inside stainless-steel protective shields. Laser-welded housings resist thermal shock and exhaust condensation, while factory-style 4-wire connectors ensure plug-and-play installation without wire splicing. Precision-cut M18x1.5 threads with anti-seize prevent manifold bung galling and directly replace OEM numbers 234-4107 and 3S4Z9F472DA for accurate PCM fuel-trim control.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2010-2013 Ford Transit Connect
Engine / Chassis 2.0L Duratec DOHC I4 / V227
Sensor & Emissions Spec 4-Wire Heated Zirconia / Upstream & Downstream Pair
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-4107, 3S4Z9F472DA

Compatibility

  • 2010-2013 Ford Transit Connect 2.0L

Frequently Asked Questions & Fitment Warnings

Does this fit the V227 Transit Connect?

Yes. Fits 2010-2013 Ford Transit Connect models with the 2.0L Duratec DOHC I4 engine. Confirm 2.0L engine before ordering; excludes 2014+ models.

Will this clear P0135, P0141, or P0420 codes?

Yes, when caused by worn sensors. Replacing both sensors fixes heater faults like P0135/P0141; verify wiring integrity and catalyst health if P0420 returns.

Is any splicing or special prep needed for installation?

No splicing is required. Factory connectors plug straight in; chase the bung threads and torque to spec without contaminating the sensor tip.

The Ford Heavy-Duty Standard

Built for commercial fleet uptime, these sensors maintain tight air-fuel stoichiometry under heavy stop-and-go duty. Restore ECU precision and CEL-free emissions compliance.




Fitment

Make

Ford

Engine Size

  • 2.0L

Year

  • 2010
  • 2011
  • 2012
  • 2013

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Ford Transit Connect (2010-2013) 2.0L

$44.95