Skip to product information
1 of 4

O2 Oxygen Sensor Upstream Downstream for Ford Fusion (2014-2016) 2.5L



Regular price $67.95
Sale price $67.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2014-2016 Ford Fusion (CD4)

What it Does: This matched upstream and downstream O2 sensor kit for the 2014-2016 Ford Fusion (CD4) with the 2.5L Duratec engine measures exhaust oxygen content before and after the catalytic converter to regulate closed-loop air-fuel ratios and verify catalyst efficiency.

The Stock Ford Fusion Sensor Degradation

On high-mileage CD4 models running the 2.5L Duratec inline-four, factory oxygen sensors suffer from thermal cycling fatigue, silicon or carbon contamination, and internal heater element burnout. Once the zirconia sensing element fouls or its response time slows, the PCM receives skewed voltage feedback, locking fuel trims out of spec and triggering P0133, P0135, or P0141 heater circuit faults. Replacing only one sensor frequently leaves an aged companion sensor lagging, causing persistent P0171 lean codes or erratic closed-loop fueling.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light & DTCs: Stored fault codes such as P0133 (slow response), P0135/P0141 (heater circuit malfunction), or P0171 (system too lean) caused by sluggish sensor switching or open internal heater windings.
  • Erratic Fuel Trims & Rough Idle: Delayed closed-loop feedback forces the PCM to over- or under-fuel the 2.5L Duratec, resulting in surging idle, throttle hesitation, and fouled spark plugs.
  • Poor MPG & Failed Emissions Testing: Unmonitored rich running conditions reduce fuel economy, increase tailpipe hydrocarbon output, and prevent OBD-II emissions readiness monitors from setting.

The Direct-Fit Matched Oxygen Sensor Solution

This matched replacement pair crosses to OEM reference 234-5176 with direct-fit upstream (Bank 1 Sensor 1) and downstream (Bank 1 Sensor 2) sensors engineered for the CD4 2.5L Duratec exhaust architecture. Each unit features high-temperature stainless steel housings, protective porous PTFE breather membranes, and laser-welded sensing bodies to resist moisture ingress and thermal shock. Factory-length shielded wiring harnesses and OE-style weatherproof connectors plug directly into the stock engine harness without splicing, restoring fast light-off times and accurate air-fuel trim control.

What's Included

  • 1x Upstream Oxygen Sensor
  • 1x Downstream Oxygen Sensor

Technical Specifications

Fitment 2014-2016 Ford Fusion
Engine / Chassis 2.5L Duratec / CD4
Emissions & Sensor Spec Upstream & Downstream Direct-Fit Heated Oxygen Sensors
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-5176

Compatibility

  • 2014 Ford Fusion 2.5L
  • 2015 Ford Fusion 2.5L
  • 2016 Ford Fusion 2.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the CD4 Fusion?

Yes. This is a direct fit for the 2014-2016 Ford Fusion equipped with the 2.5L Duratec engine. Not compatible with 1.5L EcoBoost, 1.6L EcoBoost, 2.0L EcoBoost, or 2.0L Hybrid powertrains; confirm engine displacement before ordering.

Will replacing both sensors clear P0133, P0135, or P0141 codes?

Yes, when the fault stems from degraded sensing elements or failed internal heaters. Installing both upstream and downstream sensors referencing 234-5176 restores proper closed-loop voltage switching and heater resistance, allowing the PCM to clear P0133, P0135, and P0141 codes after a standard drive cycle provided there are no exhaust leaks or damaged harness wires.

Is wiring splicing or specialty modification required for installation?

No. Both sensors come with factory-length leads and OE-style connectors for plug-and-play installation into the CD4 harness. Apply a small amount of oxygen-sensor-safe anti-seize only to the threads (keep clear of the sensing tip) and torque to factory specification with a 22mm O2 sensor socket.

The Ford Precision Standard

Engineered for strict ECU compliance and CEL-free drivability, this matched sensor pair keeps the 2.5L Duratec running at stoichiometric efficiency across daily driving conditions. Restore crisp closed-loop fuel control, reliable emissions readiness, and factory-grade sensor longevity in a single service.




Fitment

Make

Ford

Engine Size

  • 2.5L

Year

  • 2014
  • 2015
  • 2016

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Ford Fusion (2014-2016) 2.5L

$67.95