Skip to product information
1 of 5

O2 Oxygen Sensor Upstream Downstream for Ford Fusion (2006-2009) 2.3L



Regular price $46.95
Sale price $46.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2006-2009 Ford Fusion (CD3)

What it Does: This matched upstream and downstream oxygen sensor kit restores closed-loop air-fuel ratio and catalyst monitoring on the 2006-2009 Ford Fusion CD3 equipped with the 2.3L Duratec I4.

The Stock Ford Fusion Sensor Failure

On the CD3 platform with the 2.3L Duratec I4, factory oxygen sensors suffer severe exhaust heat soak, thermal cycling, and carbon contamination. Over time, the zirconia sensing element loses switching speed and the internal heater element fractures. This forces the PCM out of closed-loop fuel control, triggering P0135, P0141, or P0171/P0172 fuel trim codes.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light: Faults like P0135, P0141, or P0133 from open heater circuits or slow switching.
  • Fuel Trim Drift: Erratic air-fuel feedback causing rough idle, hesitation, and excess exhaust soot.
  • Failed Emissions: Inaccurate downstream catalyst monitoring (P0420) and reduced fuel economy.

The Direct-Fit Heated Zirconia O2 Sensor Solution

Installing matched direct-fit sensors referencing OEM numbers 234-4374 and 234-4609 restores fast, synchronized PCM air-fuel feedback across the exhaust stream. Each unit features a corrosion-resistant stainless steel housing, laser-welded protective shield, and fast-acting heated zirconia element for rapid cold-start light-off. Factory-length wiring leads and weather-sealed OEM-style connectors ensure direct plug-and-play fitment without cutting or splicing.

What's Included

  • 1x Upstream Oxygen Sensor
  • 1x Downstream Oxygen Sensor

Technical Specifications

Fitment 2006-2009 Ford Fusion
Engine / Chassis 2.3L Duratec I4 / CD3
Sensing Architecture Heated Zirconia / Upstream & Downstream
Installation Type Direct Thread-In & Plug-In OEM Replacement (No Splicing)
Replaces OEM Part # 234-4374, 234-4609

Compatibility

  • 2006-2009 Ford Fusion 2.3L

Frequently Asked Questions & Fitment Warnings

Does this fit the CD3 Fusion?

Yes. This fits the 2006-2009 Ford Fusion equipped with the 2.3L Duratec I4 engine. Excludes 3.0L V6 models; confirm engine before ordering.

Will this clear P0135 or P0141 codes?

Yes, when sensor-related. Replacing worn upstream (234-4374) and downstream (234-4609) sensors resolves heater and response faults, though a failed catalyst will still trigger P0420.

Are splicing or extra hardware required?

No. Both units include OEM-style connectors for direct plug-in installation; torque to spec using a 22mm O2 sensor socket.

The Ford Precision Standard

Engineered for accurate emissions compliance and crisp ECU calibration, this matched sensor set keeps your 2.3L Duratec I4 running clean and CEL-free. Restore factory fuel trim control without dealership cost.




Fitment

Make

Ford

Engine Size

  • 2.3L

Year

  • 2006
  • 2007
  • 2008
  • 2009

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Ford Fusion (2006-2009) 2.3L

$46.95