O2 Oxygen Sensor Upstream Downstream for Chevrolet Tahoe (1996-2000) 5.7L
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 1996-2000 Chevrolet Tahoe (GMT400)
What it Does: This 4-piece upstream and downstream oxygen sensor kit measures pre- and post-catalytic converter exhaust oxygen levels on the 1996-2000 Chevrolet Tahoe (GMT400) 5.7L L31 Vortec V8 to regulate closed-loop fuel trim and verify catalyst efficiency.
The Stock Chevrolet Tahoe Sensor Failure
Factory oxygen sensors on the GMT400 chassis equipped with the 5.7L L31 Vortec V8 operate under severe exhaust heat cycles and carbon soot exposure. Over time, internal zirconia ceramic elements suffer thermal shock or contamination, while internal heater circuits burn out. This causes sluggish voltage switching and biased air-fuel feedback to the PCM, triggering P0135, P0155, or catalyst efficiency codes P0420/P0430 and forcing rich fuel trim defaults.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / DTCs: Stored heater circuit or slow-response codes such as P0135, P0155, P0131, or P0420/P0430 caused by degraded zirconia output or open heater resistance.
- Unstable Idle & Hesitation: Erratic pre-cat voltage swings skew bank-to-bank fuel trims, causing rough idling, stumble under throttle, and delayed closed-loop transition.
- High Fuel Consumption & Failed Emissions: Biased lean signals force excess injector pulse width, lowering MPG and preventing OBD-II readiness monitors from setting.
The Direct-Fit 4-Sensor Solution
This complete four-piece upstream and downstream sensor kit restores balanced bank-to-bank air-fuel telemetry across both pre-cat and post-cat exhaust bungs on the 5.7L L31. Built with fast-acting heated zirconia sensing elements, stainless steel housings, and factory-indexed weatherpack connectors, each unit replaces worn sensors matching OEM numbers B9617178, 3B234-4012, 4BSG454, and BA234-4018. Direct-fit harness lengths eliminate wire splicing, ensuring accurate closed-loop fuel control and clean catalytic converter monitoring.
What's Included
- 2 Upstream (Pre-Catalytic Converter) Oxygen Sensors
- 2 Downstream (Post-Catalytic Converter) Oxygen Sensors
Technical Specifications
| Fitment | 1996-2000 Chevrolet Tahoe |
|---|---|
| Engine / Chassis | 5.7L L31 Vortec V8 / GMT400 |
| Emissions & Sensing Element | Heated Zirconia Ceramic / Upstream & Downstream (4-Piece) |
| Installation Type | Direct Bolt-On OEM Replacement (No Splicing or Cutting) |
| Replaces OEM Part # | B9617178, 3B234-4012, 4BSG454, BA234-4018, B-SG236, B-13474, CB991773S00 |
Compatibility
- 1996-2000 Chevrolet Tahoe — 5.7L V8 (Confirm connector style, engine displacement, and model year before ordering)
Frequently Asked Questions & Fitment Warnings
Does this fit the GMT400 Tahoe?
Yes. This is a direct fit for the 1996-2000 Chevrolet Tahoe equipped with the 5.7L L31 Vortec V8 engine. Does not fit 2000 GMT800 models equipped with the 4.8L or 5.3L engines, diesel models, or alternate connector configurations; verify engine displacement and plug style prior to installation.
Will replacing all four sensors resolve fuel trim and P0420/P0430 codes?
Yes, when caused by faulty sensors. Replacing both upstream and downstream pairs together eliminates reading discrepancies between banks, restoring accurate fuel trim and confirming whether the catalytic converter substrate is functioning within P0420/P0430 thresholds.
Do these sensors require splicing, and what prep is needed during install?
No splicing is required. Thread each sensor in by hand before torquing to spec, keep grease or anti-seize strictly off the sensing tip, and clear stored DTCs before running a complete drive cycle to set readiness monitors.
The Chevrolet Heavy-Duty Standard
Designed for the thermal loads of towing, hauling, and high-mileage V8 operation on the GMT400 platform. Matched upstream and downstream telemetry keeps your 5.7L Vortec running lean-protected, responsive, and emissions-compliant.
Fitment
Fitment
|
Make |
Chevrolet |
|---|---|
|
Engine Size |
|
|
Year |
|
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$60.95