Skip to product information
1 of 5

O2 Oxygen Sensor Upstream Downstream for Buick LaCrosse (2011-2014) 2.4L



Regular price $51.95
Sale price $51.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit O2 Sensor Kit for 2011-2014 Buick LaCrosse (Epsilon II)

What it Does: This 2-piece upstream and downstream oxygen sensor kit restores closed-loop fuel metering and converter efficiency monitoring on the 2011-2014 Buick LaCrosse (Epsilon II) with the LAF / LUK 2.4L engine.

The Stock Buick LaCrosse Sensor Failure

On the Epsilon II LaCrosse with the LAF / LUK 2.4L engine, factory oxygen sensors endure heavy thermal cycling, exhaust soot contamination, and heater circuit fatigue. Over time, the zirconia element becomes sluggish or biased while internal heater coils burn out, delaying closed-loop cold-start operation. A failing sensor triggers stored P0135, P0141, or P0420 fault codes and forces inaccurate fuel trim corrections.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers P0135, P0141, or P0420 from heater circuit failure or slow voltage response.
  • Fuel Trim & Idle Issues: Biased feedback causes rough idle, throttle hesitation, and elevated fuel consumption.
  • Emissions Failure: Incomplete catalytic readiness monitors prevent passing state emissions testing.

The Direct-Fit O2 Sensor Solution

Replacing both pre-cat and post-cat sensors together (interchange 25024698 / 12622308) prevents voltage drift between banks and restores accurate ECM fuel trim control. Built with OEM-style weatherproof connectors and factory thread geometry, these direct-fit units install without splicing universal harnesses. Precision sensing elements deliver rapid light-off and clean voltage switching so upstream air-fuel metering and downstream catalytic readiness monitors complete reliably.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2011-2014 Buick LaCrosse
Engine / Chassis LAF / LUK 2.4L / Epsilon II
Sensor Configuration Direct-Fit Upstream & Downstream Heated O2 Kit
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Splicing)
Replaces OEM Part # 25024698, 12622308

Compatibility

  • 2011-2014 Buick LaCrosse 2.4L

Frequently Asked Questions & Fitment Warnings

Does this fit the Epsilon II LaCrosse?

Yes. Direct fit for the 2011-2014 Buick LaCrosse with the LAF / LUK 2.4L engine. Excludes V6 models and other years; verify connector style before ordering.

Will this clear P0135, P0141, or P0420 codes?

Yes, if caused by sensor failure. Clear stored codes after installation and complete a drive cycle so readiness monitors reset.

Is wire splicing or special prep required?

No splicing required. Keep anti-seize off the sensing tip, hand-thread the body, and torque to specification.

The Buick Precision Standard

Consistent closed-loop fuel control is critical for emissions compliance and CEL-free operation on the Epsilon II platform. Replacing both sensors together ensures accurate ECM telemetry.




Fitment

Make

Buick

Engine Size

  • 2.4L

Year

  • 2011
  • 2012
  • 2013
  • 2014

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

O2 Oxygen Sensor Upstream Downstream for Buick LaCrosse (2011-2014) 2.4L

$51.95