Hubcentric Wheel Spacer Kit for Ferrari 488 F8 Roma (2015-2024) 15mm

Precision Hubcentric 15mm Wheel Spacer Kit for 2015-2024 Ferrari 488, F8, Roma (F142M / F169)

What it Does: The 15mm Hubcentric Wheel Spacer Kit widens the front and rear track width on the 2015-2024 Ferrari 488, F8, and Roma to eliminate sunken wheel fitment, reduce lateral body roll, and ensure proper carbon-ceramic rotor hat clearance without high-speed vibration.

The Stock Ferrari 488, F8, Roma Offset & Brake Hat Limitations

Factory wheel offsets on the F142M (488/F8) and F169 (Roma) chassis sit conservatively inboard to clear wide factory road tolerances. This tucked geometry compromises stance and limits lateral mechanical grip through fast sweepers. Furthermore, generic spacers fail to account for the unique face geometry of Ferrari factory Brembo carbon-ceramic (CCM) brake rotor hats, which feature specific bolt recesses and locating pins. Installing flat-backed spacers against these hats causes improper mating, rotational runout, brake chatter, and dangerous hub vibrations under high-load braking.

The Engineering Solution

Engineered from high-tensile 7075 billet aluminum, this 15mm kit provides exceptional shear resistance with targeted weight-saving cutouts to reduce unsprung rotating mass. Each spacer is precision-machined with a continuous 67.1mm hubcentric centering ring and reverse-face relief channels specifically matched to Ferrari carbon-ceramic rotor hats. A hard black-anodized finish prevents galvanic corrosion against aluminum hubs. The kit includes extended black Grade 12.9 race wheel bolts engineered to resist tensile yield and thermal shear stresses generated by the twin-turbocharged F154 V8.

What's Included

• 4 x 15mm 7075 Billet Aluminum Hubcentric Wheel Spacers
• Longer Black Grade 12.9 Tensile Race Bolts

Technical Specifications

Compatibility

• 2015-2019 Ferrari 488 GTB / Spider
• 2018-2020 Ferrari 488 Pista / Pista Spider
• 2019-2023 Ferrari F8 Tributo / Spider
• 2020-2024 Ferrari Roma / Roma Spider

Frequently Asked Questions & Fitment Warnings

Does this fit the F142M and F169 Ferrari chassis?

Yes, this is a direct fit for the 2015-2024 Ferrari 488, F8, and Roma equipped with the F154 engine and factory 5x114.3 carbon-ceramic rotor configurations.

What torque specification should be used with the included 12.9 hardware?

Torque the extended Grade 12.9 bolts dry to factory specification (100 Nm / 74 lb-ft) in a star pattern and re-torque after 50 to 100 miles of operation.

The Ferrari Precision Standard

Exotic European mid-engine and front-mid layouts demand micrometer-exact hub interfaces; this spacer kit preserves critical steering geometry, eliminates hub deflection, and ensures vibration-free stability under high-speed track loads.