High Output Alternator for Toyota Sequoia (2008-2018) 4.6L 5.7L
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
High-Output 250A Alternator for 2008-2018 Toyota Sequoia (XK60)
What it Does: This 250-amp, 12-volt High Output Alternator is a complete bolt-on charging assembly engineered for the XK60 Toyota Sequoia (3UR-FE 5.7L and 1UR-FE 4.6L) to stabilize system voltage and support heavy auxiliary electrical loads.
The Stock Toyota Sequoia Charging Bottleneck
The factory 150-amp alternator (27060-0S020 / 104210-5090) on the XK60 Toyota Sequoia equipped with the 3UR-FE 5.7L or 1UR-FE 4.6L engine regularly fails from chronic underhood heat soak. Sustained electrical demand from recovery gear, auxiliary lighting, or audio amplifiers drives stator temperatures past factory thresholds and causes diode rectifier burnout. As internal brushes wear and rectifier diodes short, charging output collapses at idle. This voltage instability trips diagnostic codes P0562 and P0620 while starving ignition and fuel systems.
Common Symptoms of a Failing OEM Alternator
- Charging System DTCs: Triggers P0562 (System Voltage Low) or P0620 (Generator Control Circuit) when alternator output drops below ECM target thresholds.
- Voltage Drop Under Load: Dimming headlights, sluggish power accessories, and erratic dash voltage readings when AC fans or auxiliary gear engage at idle.
- Battery Drain & Hard Starting: Chronic undercharging leaves the primary battery depleted, causing slow cranking or no-start conditions after short trips.
The High-Output 250A Alternator Solution
Built in the USA as a brand-new unit—never a rebuilt core—this 250A, 12V alternator replaces 11352 and 210-0697 with high-capacity internal windings. Its complete housing, pulley, and internal voltage regulator bolt directly onto 3UR-FE and 1UR-FE mounts using factory electrical connectors. Upgraded charging capacity supports recovery gear, audio systems, and auxiliary lighting without starving the primary battery. Maintaining a sound drive belt, tensioner, and heavy-gauge battery cables ensures full output without belt slip or idle voltage drop.
What's Included
- 1 High-Output 250A Complete Alternator Assembly (New Housing, Pulley, Voltage Regulator, and Internal Windings)
Technical Specifications
| Fitment | 2008-2018 Toyota Sequoia |
|---|---|
| Engine / Chassis | 4.6L (1UR-FE), 5.7L (3UR-FE) / XK60 |
| Factory Electrical Output | 150 Amps / 12V |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 11352, 11352-250A, 210-0697, 104210-5090, 27060-0S020 |
Compatibility
- 2008-2018 Toyota Sequoia 5.7L (3UR-FE)
- 2010-2012 Toyota Sequoia 4.6L (1UR-FE)
Frequently Asked Questions & Fitment Warnings
Does this fit the XK60 Sequoia?
Yes. This is a direct fit for the 2008-2018 Toyota Sequoia equipped with the 3UR-FE 5.7L engine and the 2010-2012 Toyota Sequoia equipped with the 1UR-FE 4.6L engine. It does not fit earlier 4.7L (2UZ-FE) Sequoia models, hybrid powertrains, or years outside the listed range; always compare the pulley and electrical connector before ordering.
Will this resolve P0562 low-voltage codes and support auxiliary accessories?
Yes. Replacing a degraded factory unit restores proper charging voltage to clear P0562 and P0620 faults while providing 250A rated capacity (actual output scales with engine speed and electrical load) for lights, audio, and recovery gear.
What installation steps and checks are required during replacement?
Disconnect the negative battery terminal before installation and inspect your serpentine belt, tensioner, and battery cables for wear. Transfer original spacers or dust covers only if compatible with the new housing, torque mounting bolts to factory specifications, and verify charging voltage at the battery with a meter after startup.
The Toyota Heavy-Duty Standard
Engineered for full-size XK60 SUVs tasked with heavy towing, overlanding, and high-draw accessory duty, this USA-built alternator delivers consistent thermal durability under sustained electrical load. Verify your underhood engine displacement and connector style prior to ordering for a direct, trouble-free charging upgrade.
Fitment
Fitment
|
Make |
Toyota |
|---|---|
|
Engine Size |
|
|
Year |
|
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$337.95