Skip to product information
1 of 4

High Output Alternator for Toyota 4Runner (2014-2022) 4.0L



Regular price $402.95
Sale price $402.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

260-Amp High Output Alternator for 2014-2022 Toyota 4Runner (N280)

What it Does: This 260-amp, 12-volt high-output alternator replaces the factory unit on the N280 2014-2022 Toyota 4Runner with the 1GR-FE 4.0L V6 engine to supply increased charging current.

The Stock Toyota 4Runner Charging System Bottleneck

The factory 130-amp alternator (such as 27060-31190 or 104210-2860) on the N280 1GR-FE 4.0L V6 operates near maximum duty cycle when powering winches, off-road lighting, or audio amplifiers. Sustained engine-bay heat soak causes stator winding insulation breakdown and diode rectifier burnout under prolonged electrical demand. Once internal brushes wear or the voltage regulator fails, charging voltage drops at idle and the ECU triggers P0562 or P0620 fault codes.

Common Symptoms of a Failing OEM Alternator

  • Check Engine / Battery Light: Triggers P0562 (System Voltage Low) or P0620 (Generator Control Circuit) when regulator output drops.
  • Voltage Drop Under Load: Dimming headlights or battery drain at idle while operating auxiliary lighting or recovery gear.
  • Bearing Whine or Hard Starts: Worn rotor bearings or shorted rectifier diodes causing mechanical noise and undercharged cranking.

The High-Output 260-Amp Alternator Solution

Built as a complete new unit rather than a rebuilt core, this 260-amp alternator integrates heavy-duty internal windings, a matched regulator, and a pre-installed overdrive pulley to maximize low-RPM output. The cast housing bolts directly onto the 1GR-FE 4.0L V6 engine and replaces 27060-31190, 27060-31260, and 104210-2860 using factory mounting geometry. Pairing installation with a heavier fused main charging cable ensures full amperage reaches the battery.

What's Included

  • 1x Complete New 260-Amp Alternator (Assembled housing, overdrive pulley, regulator, and internal windings)

Technical Specifications

Fitment 2014-2022 Toyota 4Runner
Engine / Chassis 1GR-FE 4.0L V6 / N280
Factory Electrical Output 130 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 104210-2860, 104210-2863, 104210-2864, 27060-31190, 104211-8602, 104211-8603, 27060-31260, 104210-2840, 27060-31180

Compatibility

  • 2014-2022 Toyota 4Runner 4.0L (N280 Chassis, 1GR-FE Engine)

Frequently Asked Questions & Fitment Warnings

Does this fit the N280 4Runner?

Yes. This is a direct fit for the 2014-2022 Toyota 4Runner equipped with the 1GR-FE 4.0L V6 engine. Excludes hybrid powertrains, other displacements, and years outside 2014-2022; verify connector and pulley match before ordering.

Will this clear P0562 codes, and can I swap my OEM pulley onto this unit?

Yes, restoring charging voltage clears P0562/P0620 codes, and no, do not swap pulleys. Replacing the installed overdrive pulley reduces idle output; a slightly shorter drive belt may be required if squealing or slipping occurs.

What is required during installation?

Disconnect the battery, transfer original spacers or dust covers only if compatible, and torque bolts to factory spec. Use a heavier fused main charging cable for full 260-amp transfer and verify charging voltage with a meter.

The Toyota Heavy-Duty Standard

Built for N280 trail rigs and tow vehicles running winches and auxiliary lighting, this 260-amp unit delivers sustained thermal durability and stable charging voltage.




Fitment

Make

Toyota

Engine Size

  • 4.0L

Year

  • 2014
  • 2015
  • 2016
  • 2017
  • 2018
  • 2019
  • 2020
  • 2021
  • 2022

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

High Output Alternator for Toyota 4Runner (2014-2022) 4.0L

$402.95