High Output Alternator for Nissan Altima (1998-2001) 2.4L
Couldn't load pickup availability
- Guaranteed Fitment
- Free Shipping, Lower 48 States
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
High-Output 200A Alternator for 1998-2001 Nissan Altima (L30)
What it Does: This brand-new 200-amp, 12-volt high-output alternator replaces the factory charging unit on the 1998-2001 Nissan Altima (L30) with the KA24DE 2.4L engine to deliver increased electrical current for vehicle charging and high-draw accessories.
The Stock Nissan Altima Charging System Failure
The factory 100-amp Hitachi charging unit (LR1100-709 / 23100-9E000) on the L30 Altima with the KA24DE 2.4L engine frequently suffers from diode rectifier burnout and voltage regulator thermal fatigue due to under-hood heat soak. As internal stator windings degrade and carbon brushes wear down, amperage output drops sharply at idle. Adding auxiliary lighting, audio amplifiers, or recovery gear pushes the aging generator past its thermal duty cycle, triggering charging faults like P0562 (System Voltage Low) or P0563.
Common Symptoms of a Failing OEM Alternator
- Charging System DTCs & Warning Lamps: Triggered check engine codes such as P0562 or P0563 alongside an illuminated battery light when the regulator fails to hold 13.8V-14.4V.
- Voltage Drop & Dimming Under Load: Flickering headlights, sluggish window motors, and unstable ECU voltage at idle when accessories engage, often accompanied by bearing whine from the pulley.
- Drivability & Starting Failure: Repeated battery depletion, slow cranking, or sudden stalling due to insufficient alternator output to power fuel injection and ignition coils.
The High-Output 200-Amp Alternator Solution
Built in the USA as a brand-new assembly—not a remanufactured core—this 200-amp, 12-volt high-output alternator doubles available charging capacity for the L30 chassis. High-efficiency internal stator windings, a heavy-duty regulator, and precision-balanced pulley are housed in a direct-fit casting matching 23100-9E000 mounting geometry. It bolts directly into the factory KA24DE 2.4L bracketry and electrical harness while supplying stable amperage for aftermarket accessories. Inspect the drive belt, tensioner, and battery cables before installation to prevent belt slip or voltage drop under peak load.
What's Included
- 1 Complete Brand-New 200-Amp, 12-Volt High-Output Alternator (assembled with housing, pulley, internal voltage regulator, and stator/rotor windings)
Technical Specifications
| Fitment | 1998-2001 Nissan Altima |
|---|---|
| Engine / Chassis | KA24DE 2.4L / L30 |
| Factory Electrical Output | 100 Amps / 12V (Upgraded to 200 Amps / 12V) |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 13760, AL2376X, 210-3100, LR1100-709, LR1100-709B, 13760N, 13760R, 23100-9E000, 23100-9E000R |
Compatibility
- 1998-2001 Nissan Altima 2.4L (L30 Chassis / KA24DE Engine)
Frequently Asked Questions & Fitment Warnings
Does this fit the L30 Altima?
Yes. This is a direct fit for the 1998-2001 Nissan Altima equipped with the KA24DE 2.4L engine. Do not install on a hybrid powertrain, a different engine displacement, or model years outside 1998-2001; verify the pulley and electrical connector match your original unit before ordering.
Will this resolve P0562 low-voltage codes and support aftermarket electrical loads?
Yes. Replacing a worn LR1100-709 or 23100-9E000 generator with this 200-amp, 12-volt assembly restores charging stability to clear P0562 faults and sustain aftermarket lights, audio, or recovery gear. Actual output varies with engine speed and electrical load; verify charging voltage at the battery with a multimeter after startup.
Are spacers or mounting brackets required for installation?
No additional mounting brackets are needed. The unit ships fully assembled; disconnect the battery before work, transfer original spacers or dust covers only if designed for reuse, torque mounting bolts to factory specification, and inspect the drive belt, tensioner, and battery cables so a worn belt or weak cable does not cause slip or voltage drop.
The Nissan Precision Charging Standard
Engineered for both daily commuters and accessory-loaded L30 builds, this Made-in-USA charging unit maintains consistent electrical output and clean ECU voltage regulation across the RPM band. Built exclusively with new internal components rather than rebuilt cores, it eliminates idle voltage sag under sustained accessory demand.
Fitment
Fitment
|
Make |
Nissan |
|---|---|
|
Engine Size |
|
|
Year |
|
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$297.95