Skip to product information
1 of 4

High Output Alternator for Jeep Wrangler (2019-2022) 3.6L



Regular price $418.95
Sale price $418.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

300-Amp High-Output Alternator for 2019-2022 Jeep Wrangler (JL)

What it Does: This 300-amp 12V alternator replaces the factory charging unit on 2019-2022 Jeep Wrangler JL 3.6L Pentastar V6 models, supplying sustained current for lights, audio, and recovery gear.

The Stock Jeep Wrangler Charging Bottleneck

Factory alternators on the JL equipped with the 3.6L Pentastar V6 (OE 56029803AA, 421000-7231) operate near thermal capacity when powering winches, lighting, and audio amplifiers. Prolonged high-amperage draw at low trail RPMs causes stator heat soak, brush wear, and diode rectifier burnout. When regulated bus voltage sags, the PCM logs P0562 (System Voltage Low) or P0622 (Generator Field Circuit) faults.

Common Symptoms of a Failing OEM Alternator

  • Charging DTCs: Stored P0562 or P0622 codes from low bus voltage or field circuit failure.
  • Voltage Drop Under Load: Dimming lights, slow winch recovery, or battery discharge at idle.
  • Mechanical/Audible Wear: Belt squeal, bearing noise, or hard starts from weak battery recovery.

The 300-Amp High-Output Alternator Solution

Constructed from all-new components rather than a rebuilt core, this complete unit combines high-output stator windings, an integrated regulator, and a pre-installed overdrive pulley to boost rotor speed at idle. The 300-amp 12-volt design prevents thermal fade and stabilizes voltage under heavy accessory loads. Its OE-style housing and factory connector bolt directly onto the 3.6L Pentastar V6 without bracket modifications.

What's Included

  • 1x Complete 300-Amp 12V Alternator (housing, internal windings, regulator, and pre-installed overdrive pulley)

Technical Specifications

Fitment 2019-2022 Jeep Wrangler
Engine / Chassis 3.6L Pentastar V6 / JL
Factory Electrical Output 180–240 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 56029803AA, 421000-7231

Compatibility

  • 2019-2022 Jeep Wrangler (JL) 3.6L Pentastar V6 (Non-Hybrid Models Only)

Frequently Asked Questions & Fitment Warnings

Does this fit the JL Wrangler?

Yes. This fits 2019-2022 Jeep Wrangler 3.6L Pentastar V6 models. Excludes hybrid eTorque powertrains, other displacements, and years outside 2019-2022; compare pulley and connector before ordering.

Can I reuse my OEM pulley or clear P0562?

No, keep the pre-installed overdrive pulley. It maintains idle output to help prevent P0562 faults; a shorter drive belt and heavier fused main charging cable are recommended if needed.

What installation prep is required?

Disconnect the battery first. Reuse spacers or dust covers only if compatible, torque bolts to spec, and verify battery charging voltage.

The Jeep Heavy-Duty Standard

Engineered for recovery gear, auxiliary accessories, and thermal durability, this 300-amp alternator delivers dependable charging stability on the JL platform.




Fitment

Make

Jeep

Engine Size

  • 3.6L

Year

  • 2019
  • 2020
  • 2021
  • 2022

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

High Output Alternator for Jeep Wrangler (2019-2022) 3.6L

$418.95