Skip to product information
1 of 5

High Output Alternator for Infiniti QX70 (2010-2016) 3.5L 3.7L



Regular price $438.95
Sale price $438.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

250-Amp High-Output Alternator for 2010-2016 Infiniti QX70 (S51)

What it Does: This 250-amp, 12-volt alternator replaces the factory generator on the 2010-2016 Infiniti QX70 (S51) with VQ35HR or VQ37VHR engines to deliver increased charging current under heavy accessory loads.

The Stock Infiniti QX70 Charging System Bottleneck

On the S51 chassis equipped with the VQ35HR 3.5L or VQ37VHR 3.7L engine, the factory 150-amp unit (OEM A3TJ1991B) runs near thermal capacity in tight V6 engine bays. Prolonged underhood heat soak degrades internal voltage regulator circuitry and fatigues diode rectifier bridges. When aftermarket lighting, audio amplifiers, or recovery gear draw continuous current, stator windings overheat and voltage drops below 12.6V. This electrical starvation triggers ECM fault codes P0562 and P0620 while accelerating battery sulfation.

Common Symptoms of a Failing OEM Alternator

  • Check Engine Light & Charging DTCs: ECM logs P0562 (System Voltage Low) or P0620 (Generator Control Circuit) when regulated output drops under load.
  • Voltage Drop & Dimming Electronics: Headlights flicker and dashboard clusters dim at idle as the worn rectifier fails to maintain 13.8V–14.4V.
  • Hard Starting & Dead Batteries: Insufficient amperage recovery during short drives leaves the 12V battery undercharged, causing slow cranking and premature cell failure.

The High-Output 250-Amp Alternator Solution

Built in the USA as a brand-new assembly—not a remanufactured core—this 250-amp generator delivers substantially higher stator current than stock 11438 replacements. Precision-wound internal copper coils, a heavy-duty rectifier, and an integrated voltage regulator stabilize charging output across all RPM ranges. Its housing, pulley, and electrical connector match OEM A3TJ1991B mounting geometry for direct bolt-on installation. Pair this upgrade with healthy serpentine belts, tensioners, and primary cables to prevent belt slip and voltage drop.

What's Included

  • 1x Complete New 250-Amp, 12V High-Output Alternator (Assembled Housing, Pulley, Regulator, and Internal Windings)

Technical Specifications

Fitment 2010-2016 Infiniti QX70
Engine / Chassis 3.5L VQ35HR / 3.7L VQ37VHR / S51
Factory Electrical Output 150 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11438, 11438N, 11438R, A3TJ1991B

Compatibility

  • 2010-2012 Infiniti QX70 3.5L (VQ35HR)
  • 2013-2016 Infiniti QX70 3.7L (VQ37VHR)

Frequently Asked Questions & Fitment Warnings

Does this fit the S51 QX70?

Yes. This is a direct fit for the 2010-2016 Infiniti QX70 equipped with the 3.5L VQ35HR (2010-2012) or 3.7L VQ37VHR (2013-2016) engine. Do not install on hybrid powertrains, different engine displacements, or model years outside 2010-2016; confirm pulley and connector match before ordering.

Will this clear P0562 voltage codes, and does it deliver 250 amps at idle?

Yes, replacing a failing OEM unit resolves P0562 and P0620 charging faults. The 250-amp rating represents maximum unit capacity; actual charging output varies with engine RPM and active electrical load.

Are mounting hardware and spacers included, and what prep is required?

No additional hardware is included; reuse factory bolts, spacers, or dust covers if applicable. Disconnect the battery prior to installation, inspect the drive belt, tensioner, and battery cables for wear, torque mounting bolts to factory specs, and verify charging voltage with a meter.

The Infiniti Performance Standard

Engineered for the high-revving VQ35HR and VQ37VHR platforms, this Made-in-USA 250-amp charging unit maintains stable ECU voltage and accessory reliability under demanding street or auxiliary loads. Verify engine displacement and connector style prior to bolt-on installation for trouble-free electrical performance.




Fitment

Make

Infiniti

Engine Size

  • 3.5L
  • 3.7L

Year

  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

High Output Alternator for Infiniti QX70 (2010-2016) 3.5L 3.7L

$438.95