Skip to product information
1 of 4

High Output Alternator for Ford F-250 (2013-2022) 6.2L



Regular price $390.95
Sale price $390.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

350-Amp High-Output Alternator for 2013-2022 Ford F-250 (P473 / P558)

What it Does: This 350-amp 12V high-output alternator replaces the factory unit on 2013-2022 Ford F-250 (P473 / P558) Boss 6.2L SOHC V8 trucks to sustain charging voltage under heavy auxiliary electrical loads.

The Stock Ford F-250 Charging System Bottleneck

Factory 157-amp and 200-amp units on the P473 and P558 equipped with the Boss 6.2L SOHC V8 suffer thermal heat soak and diode rectifier burnout under winch, plow, or lighting loads. Sustained current draw degrades stator insulation and brush contact, dropping system voltage below 12.6V. Overheated bridge rectifiers trigger PCM charging codes including P0562 (System Voltage Low) and P0620 (Generator Control Circuit).

Common Symptoms of a Failing OEM Alternator

  • Charging Faults / DTCs: Triggers P0562, P0620, or P0622 when field excitation fails to maintain target voltage.
  • Voltage Drop Under Load: Dimming headlights and sub-13.0V battery readings at idle with accessories active.
  • Bearing or Diode Whine: Mechanical growl from worn rotor bearings or electrical ripple from shorted diodes.

The High-Output 350-Amp Alternator Solution

Built from all-new components—never a rebuilt core—this complete unit replaces OEM numbers BL3Z-10346-B, BL3Z-10346-C, and HC3Z-10346-E using direct-fit housing geometry and an internal voltage regulator. High-capacity stator windings pair with a pre-installed overdrive pulley to boost rotor RPM and idle amperage output. It bolts directly into factory mounts with OEM connector compatibility, requiring no cutting or bracket modification.

What's Included

  • 1 Complete New 350-Amp High-Output Alternator (Housing, Internal Regulator, Windings, and Pre-Installed Overdrive Pulley)

Technical Specifications

Fitment 2013-2022 Ford F-250
Engine / Chassis Boss 6.2L SOHC V8 / P473 / P558
Factory Electrical Output 157-200 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 104210-6490, 104211-0190, 104211-0890, BL3T-10300-CA, BL3T-10300-EA, BL3Z-10346-B, BL3Z-10346-C, HC3T-10300-EA, HC3Z-10346-E

Compatibility

  • 2013-2016 Ford F-250 (P473) 6.2L V8
  • 2017-2022 Ford F-250 (P558) 6.2L V8

Frequently Asked Questions & Fitment Warnings

Does this fit the P473 / P558 F-250?

Yes. Direct fit for 2013-2022 Ford F-250 trucks with the Boss 6.2L SOHC V8. Excludes hybrid powertrains, other displacements, and years outside 2013-2022; verify pulley and connector match before ordering.

Will this clear P0562 or P0620 codes, and are upgrades required?

Yes, if caused by alternator failure. A heavier fused main charging cable is recommended for 350A flow, and a shorter belt may be needed if slip occurs—do not swap the original pulley back.

Are spacers or bolts included for installation?

No hardware is included. Disconnect the battery, reuse original spacers or dust covers only if applicable, torque mounting bolts to factory spec, and verify charging voltage with a meter.

The Ford Heavy-Duty Standard

Built for P473 and P558 trucks handling towing, plowing, and heavy accessory loads, this 350-amp alternator delivers consistent thermal durability. Confirm belt tension and battery voltage after installation.




Fitment

Make

Ford

Engine Size

  • 6.2L

Year

  • 2013
  • 2014
  • 2015
  • 2016
  • 2017
  • 2018
  • 2019
  • 2020
  • 2021
  • 2022

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

High Output Alternator for Ford F-250 (2013-2022) 6.2L

$390.95