Skip to product information
1 of 3

High Output Alternator for Ford Explorer (2005-2008) 4.0L



Regular price $290.95
Sale price $290.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

High-Output 250A Alternator for 2005-2008 Ford Explorer (U152 / U251)

What it Does: This 250-amp, 12-volt alternator replaces the OEM generator on 2005-2008 Ford Explorer (U152 / U251) models with the 4.0L Cologne SOHC V6 to support heavy electrical loads.

The Stock Ford Explorer Charging Bottleneck

Factory 130-amp units on the U152 / U251 chassis with the 4.0L Cologne SOHC V6 suffer diode rectifier burnout and stator insulation failure from under-hood heat soak. Auxiliary lights, audio amplifiers, and recovery gear push the OEM GL-600 generator past its thermal limit, causing idle voltage sag. When brushes or regulators fail, the PCM logs P0562 or P0620 and drains battery reserve.

Common Symptoms of a Failing OEM Alternator

  • Diagnostic Fault Codes: Low bus voltage triggers P0562 or P0620 charging circuit codes.
  • Voltage Drop Under Load: Dimming lights and erratic electronics at idle when load exceeds rectifier capacity.
  • Hard Starting & Bearing Noise: Undercharged batteries slow cranking while worn rotor bearings whine.

The High-Output 250A Alternator Solution

Made in the USA as a complete new unit—not a rebuilt core—this 250-amp alternator replaces OEM numbers 8519, 1F72-18-300A, GL-600, and 8446. Heavy-duty copper windings, upgraded rectifier diodes, and an internal regulator maintain charging current under high accessory loads. Supplied with housing and pulley, it bolts directly to 4.0L Cologne SOHC V6 mounts using the OE connector.

What's Included

  • 1x Complete 250-Amp Alternator (Housing, Pulley, Regulator, Internal Windings)

Technical Specifications

Fitment 2005-2008 Ford Explorer
Engine / Chassis 4.0L Cologne SOHC V6 / U152 / U251
Factory Electrical Output 130 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 8519, 1F72-18-300A, GL-600, 8446

Compatibility

  • 2005-2008 Ford Explorer 4.0L

Frequently Asked Questions & Fitment Warnings

Does this fit the U152 / U251 Explorer?

Yes. Direct fit for 2005-2008 Ford Explorer 4.0L Cologne SOHC V6 models. Excludes hybrids, other engines, and outside years; verify pulley and connector before ordering.

Will this clear P0562 codes, and is it rebuilt?

Yes, it fixes P0562/P0620 voltage faults, and no—it is brand-new, USA-made. Rated 250A output varies with RPM and load.

What prep is required for installation?

Disconnect the battery and inspect the belt, tensioner, and cables. Torque mounting bolts to spec, transfer applicable spacers/covers, and confirm battery voltage with a meter.

The Ford Heavy-Duty Standard

Built for towing and auxiliary accessories, this unit prevents thermal fade and voltage drop on your U152 / U251 electrical system.




Fitment

Make

Ford

Engine Size

  • 4.0L

Year

  • 2005
  • 2006
  • 2007
  • 2008

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

High Output Alternator for Ford Explorer (2005-2008) 4.0L

$290.95